8.1.5

Currently translated at 98.8% (1841 of 1863 strings)

Translation: Firefish/locales
Translate-URL: https://hosted.weblate.org/projects/firefish/locales/zh_Hant/

.config/LICENSE

@@ -0,0 +1,13 @@
+Copyright 2023 Firefish
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

.config/ci.yml

@@ -1,12 +1,12 @@
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-# Misskey configuration
+# Firefish configuration
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
 #   ┌─────┐
 #───┘ URL └─────────────────────────────────────────────────────
 
 # Final accessible URL seen by a user.
-# url: https://example.tld/
+url: https://example.tld/
 
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # URL SETTINGS AFTER THAT!
@@ -15,10 +15,7 @@
 #───┘ Port and TLS settings └───────────────────────────────────
 
 #
-# Misskey supports two deployment options for public.
-#
-
-# Option 1: With Reverse Proxy
+# Misskey requires a reverse proxy to support HTTPS connections.
 #
 #                 +----- https://example.tld/ ------------+
 #   +------+      |+-------------+      +----------------+|
@@ -26,44 +23,26 @@
 #   +------+      |+-------------+      +----------------+|
 #                 +---------------------------------------+
 #
-#   You need to setup reverse proxy. (eg. nginx)
-#   You do not define 'https' section.
+#   You need to set up a reverse proxy. (e.g. nginx)
+#   An encrypted connection with HTTPS is highly recommended
+#   because tokens may be transferred in GET requests.
 
-# Option 2: Standalone
-#
-#                 +- https://example.tld/ -+
-#   +------+      |   +---------------+    |
-#   | User | ---> |   | Misskey (443) |    |
-#   +------+      |   +---------------+    |
-#                 +------------------------+
-#
-#   You need to run Misskey as root.
-#   You need to set Certificate in 'https' section.
-
-# To use option 1, uncomment below line.
-port: 3000 # A port that your Misskey server should listen.
-
-# To use option 2, uncomment below lines.
-#port: 443
-
-#https:
-#  # path for certification
-#  key: /etc/letsencrypt/live/example.tld/privkey.pem
-#  cert: /etc/letsencrypt/live/example.tld/fullchain.pem
+# The port that your Misskey server should listen on.
+port: 3000
 
 #   ┌──────────────────────────┐
 #───┘ PostgreSQL configuration └────────────────────────────────
 
 db:
-  host: localhost
+  host: postgres
   port: 5432
 
   # Database name
-  db: misskey
+  db: postgres
 
   # Auth
-  user: example-misskey-user
-  pass: example-misskey-pass
+  user: postgres
+  pass: test
 
   # Whether disable Caching queries
   #disableCache: true
@@ -76,8 +55,9 @@ db:
 #───┘ Redis configuration └─────────────────────────────────────
 
 redis:
-  host: localhost
+  host: redis
   port: 6379
+  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
   #pass: example-pass
   #prefix: example-prefix
   #db: 1
@@ -89,8 +69,8 @@ redis:
 #  host: localhost
 #  port: 9200
 #  ssl: false
-#  user:
-#  pass:
+#  user: 
+#  pass: 
 
 #   ┌───────────────┐
 #───┘ ID generation └───────────────────────────────────────────
@@ -108,10 +88,14 @@ redis:
 # ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
 # ID SETTINGS AFTER THAT!
 
-id: "aid"
+id: 'aid'
+
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
 
+# Max note length, should be < 8000.
+#maxNoteLength: 3000
+
 # Whether disable HSTS
 #disableHsts: true
 
@@ -154,8 +138,8 @@ id: "aid"
 # Media Proxy
 #mediaProxy: https://example.com/proxy
 
-# Sign to ActivityPub GET request (default: false)
-#signToActivityPubGet: true
+# Proxy remote files (default: false)
+#proxyRemoteFiles: true
 
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
@@ -163,3 +147,49 @@ id: "aid"
 
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
+
+# Managed hosting settings
+# !!!!!!!!!!
+# >>>>>> NORMAL SELF-HOSTERS, STAY AWAY! <<<<<<
+# >>>>>> YOU DON'T NEED THIS! <<<<<<
+# !!!!!!!!!!
+# Each category is optional, but if each item in each category is mandatory!
+# If you mess this up, that's on you, you've been warned...
+
+#maxUserSignups: 100
+#isManagedHosting: true
+#deepl:
+#  managed: true
+#  authKey: ''
+#  isPro: false
+#
+#email:
+#  managed: true
+#  address: 'example@email.com'
+#  host: 'email.com'
+#  port: 587
+#  user: 'example@email.com'
+#  pass: ''
+#  useImplicitSslTls: false
+#
+#objectStorage:
+#  managed: true
+#  baseUrl: ''
+#  bucket: ''
+#  prefix: ''
+#  endpoint: ''
+#  region: ''
+#  accessKey: ''
+#  secretKey: ''
+#  useSsl: true
+#  connnectOverProxy: false
+#  setPublicReadOnUpload: true
+#  s3ForcePathStyle: true
+
+# !!!!!!!!!!
+# >>>>>> AGAIN, NORMAL SELF-HOSTERS, STAY AWAY! <<<<<<
+# >>>>>> YOU DON'T NEED THIS, ABOVE SETTINGS ARE FOR MANAGED HOSTING ONLY! <<<<<<
+# !!!!!!!!!!
+
+# Seriously. Do NOT fill out the above settings if you're self-hosting.
+# They're much better off being set from the control panel. 

.config/devenv.yml

@@ -0,0 +1,38 @@
+url: http://localhost:3000
+port: 3000
+
+db:
+  host: 127.0.0.1
+  port: 5432
+
+  db: firefish
+
+  user: firefish
+  pass: firefish
+
+redis:
+  host: localhost
+  port: 6379
+  family: 4
+#sonic:
+#  host: localhost
+#  port: 1491
+#  auth: SecretPassword
+#  collection: notes
+#  bucket: default
+
+#elasticsearch:
+#  host: localhost
+#  port: 9200
+#  ssl: false
+#  user:
+#  pass:
+
+id: 'aid'
+
+reservedUsernames:
+  - root
+  - admin
+  - administrator
+  - me
+  - system

.config/docker_ci.env

@@ -0,0 +1,4 @@
+# db settings
+POSTGRES_PASSWORD=test
+POSTGRES_USER=postgres
+POSTGRES_DB=postgres

.config/docker_example.env

@@ -1,4 +1,4 @@
 # db settings
-POSTGRES_PASSWORD=example-misskey-pass
-POSTGRES_USER=example-misskey-user
-POSTGRES_DB=misskey
+POSTGRES_PASSWORD=example-firefish-pass
+POSTGRES_USER=example-firefish-user
+POSTGRES_DB=firefish

.config/example.yml

@@ -1,55 +1,60 @@
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
-# Misskey configuration
+# Firefish configuration
 #━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 
+# After starting your server, please don't change the URL! Doing so will break federation.
+
 #   ┌─────┐
 #───┘ URL └─────────────────────────────────────────────────────
 
 # Final accessible URL seen by a user.
-url: https://example.tld/
-
-# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
-# URL SETTINGS AFTER THAT!
+url: https://example.com/
 
 #   ┌───────────────────────┐
 #───┘ Port and TLS settings └───────────────────────────────────
 
 #
-# Misskey requires a reverse proxy to support HTTPS connections.
+# Firefish requires a reverse proxy to support HTTPS connections.
 #
-#                 +----- https://example.tld/ ------------+
+#                 +----- https://example.com/ ------------+
 #   +------+      |+-------------+      +----------------+|
-#   | User | ---> || Proxy (443) | ---> | Misskey (3000) ||
+#   | User | ---> || Proxy (443) | ---> | Firefish (3000) ||
 #   +------+      |+-------------+      +----------------+|
 #                 +---------------------------------------+
 #
-#   You need to set up a reverse proxy. (e.g. nginx)
+#   You need to set up a reverse proxy. (e.g. nginx, caddy)
 #   An encrypted connection with HTTPS is highly recommended
 #   because tokens may be transferred in GET requests.
 
-# The port that your Misskey server should listen on.
+# The port that your Firefish server should listen on.
 port: 3000
 
+# The bind host your Firefish server should listen on.
+# If unspecified, the wildcard address will be used.
+#bind: 127.0.0.1
+
 #   ┌──────────────────────────┐
 #───┘ PostgreSQL configuration └────────────────────────────────
 
 db:
   host: localhost
   port: 5432
-
+  #ssl: false
   # Database name
-  db: misskey
+  db: firefish
 
   # Auth
-  user: example-misskey-user
-  pass: example-misskey-pass
+  user: example-firefish-user
+  pass: example-firefish-pass
 
   # Whether disable Caching queries
   #disableCache: true
 
   # Extra Connection options
   #extra:
-  #  ssl: true
+  #  ssl:
+  #   host: localhost
+  #   rejectUnauthorized: false
 
 #   ┌─────────────────────┐
 #───┘ Redis configuration └─────────────────────────────────────
@@ -57,47 +62,92 @@ db:
 redis:
   host: localhost
   port: 6379
+  #tls:
+  #  host: localhost
+  #  rejectUnauthorized: false
+  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+  #pass: example-pass
+  #prefix: example-prefix
+  #db: 1
+  #user: default
+
+#   ┌─────────────────────────────┐
+#───┘ Cache server configuration └─────────────────────────────────────
+
+# A Redis-compatible server (DragonflyDB, Keydb, Redis) for caching
+# If left blank, it will use the Redis server from above
+
+#cacheServer:
+  #host: localhost
+  #port: 6379
   #family: 0  # 0=Both, 4=IPv4, 6=IPv6
   #pass: example-pass
   #prefix: example-prefix
   #db: 1
 
-#   ┌─────────────────────────────┐
-#───┘ Elasticsearch configuration └─────────────────────────────
+# Please configure either MeiliSearch *or* Sonic.
+# If both MeiliSearch and Sonic configurations are present, MeiliSearch will take precedence.
 
-#elasticsearch:
-#  host: localhost
-#  port: 9200
+#   ┌───────────────────────────┐
+#───┘ MeiliSearch configuration └─────────────────────────────────────
+#meilisearch:
+#  host: meilisearch
+#  port: 7700
 #  ssl: false
-#  user: 
-#  pass: 
+#  apiKey:
+
+#   ┌─────────────────────┐
+#───┘ Sonic configuration └─────────────────────────────────────
+
+#sonic:
+#  host: localhost
+#  port: 1491
+#  auth: SecretPassword
+#  collection: notes
+#  bucket: default
+
 
 #   ┌───────────────┐
 #───┘ ID generation └───────────────────────────────────────────
 
-# You can select the ID generation method.
-# You don't usually need to change this setting, but you can
-# change it according to your preferences.
+# No need to uncomment in most cases, but you may want to change
+# these settings if you plan to run a large and/or distributed server.
 
-# Available methods:
-# aid ... Short, Millisecond accuracy
-# meid ... Similar to ObjectID, Millisecond accuracy
-# ulid ... Millisecond accuracy
-# objectid ... This is left for backward compatibility
+# cuid:
+#   # Min 16, Max 24
+#   length: 16
+#
+#   # Set this to a unique string across workers (e.g., machine's hostname)
+#   # if your workers are running in multiple hosts.
+#   fingerprint: my-fingerprint
 
-# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
-# ID SETTINGS AFTER THAT!
-
-id: 'aid'
 
 #   ┌─────────────────────┐
 #───┘ Other configuration └─────────────────────────────────────
 
+# Maximum length of a post (default 3000, max 100000)
+#maxNoteLength: 3000
+
+# Maximum length of an image caption (default 1500, max 8192)
+#maxCaptionLength: 1500
+
+# Reserved usernames that only the administrator can register with
+reservedUsernames: [
+  'root',
+  'admin',
+  'administrator',
+  'me',
+  'system'
+]
+
 # Whether disable HSTS
 #disableHsts: true
 
-# Number of worker processes
-#clusterLimit: 1
+# Number of worker processes by type.
+# The sum must not exceed the number of available cores.
+#clusterLimits:
+#  web: 1
+#  queue: 1
 
 # Job concurrency per worker
 # deliverJobConcurrency: 128
@@ -111,6 +161,9 @@ id: 'aid'
 # deliverJobMaxAttempts: 12
 # inboxJobMaxAttempts: 8
 
+# Local address used for outgoing requests
+#outgoingAddress: 127.0.0.1
+
 # IP address family used for outgoing request (ipv4, ipv6 or dual)
 #outgoingAddressFamily: ipv4
 
@@ -123,6 +176,7 @@ id: 'aid'
 #proxy: http://127.0.0.1:3128
 
 #proxyBypassHosts: [
+#  'web.kaiteki.app',
 #  'example.com',
 #  '192.0.2.8'
 #]
@@ -138,12 +192,69 @@ id: 'aid'
 # Proxy remote files (default: false)
 #proxyRemoteFiles: true
 
-# Sign to ActivityPub GET request (default: false)
-#signToActivityPubGet: true
-
 #allowedPrivateNetworks: [
 #  '127.0.0.1/32'
 #]
 
+# TWA
+#twa:
+#  nameSpace: android_app
+#  packageName: tld.domain.twa
+#  sha256CertFingerprints: ['AB:CD:EF']
+
 # Upload or download file size limits (bytes)
 #maxFileSize: 262144000
+
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+# Congrats, you've reached the end of the config file needed for most deployments!
+# Enjoy your Firefish server!
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+
+
+
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+# Managed hosting settings
+# >>> NORMAL SELF-HOSTERS, STAY AWAY! <<<
+# >>> YOU DON'T NEED THIS! <<<
+# Each category is optional, but if each item in each category is mandatory!
+# If you mess this up, that's on you, you've been warned...
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+#maxUserSignups: 100
+#isManagedHosting: true
+#deepl:
+#  managed: true
+#  authKey: ''
+#  isPro: false
+#
+#email:
+#  managed: true
+#  address: 'example@email.com'
+#  host: 'email.com'
+#  port: 587
+#  user: 'example@email.com'
+#  pass: ''
+#  useImplicitSslTls: false
+#
+#objectStorage:
+#  managed: true
+#  baseUrl: ''
+#  bucket: ''
+#  prefix: ''
+#  endpoint: ''
+#  region: ''
+#  accessKey: ''
+#  secretKey: ''
+#  useSsl: true
+#  connnectOverProxy: false
+#  setPublicReadOnUpload: true
+#  s3ForcePathStyle: true
+
+# !!!!!!!!!!
+# >>>>>> AGAIN, NORMAL SELF-HOSTERS, STAY AWAY! <<<<<<
+# >>>>>> YOU DON'T NEED THIS, ABOVE SETTINGS ARE FOR MANAGED HOSTING ONLY! <<<<<<
+# !!!!!!!!!!
+
+# Seriously. Do NOT fill out the above settings if you're self-hosting.
+# They're much better off being set from the control panel.

.config/helm_values_example.yml

@@ -0,0 +1,82 @@
+replicaCount: 1
+
+resources:
+  requests:
+    cpu: 0.5
+    memory: 512Mi
+  limits:
+    cpu: 1
+    memory: 1Gi
+
+firefish:
+  domain: example.tld
+  smtp:
+    from_address: noreply@example.tld
+    port: 587
+    server: smtp.gmail.com
+    useImplicitSslTls: false
+    login: me@example.tld
+    password: CHANGEME
+  objectStorage:
+    baseUrl: https://example-bucket.nyc3.cdn.digitaloceanspaces.com
+    access_key: CHANGEME
+    access_secret: CHANGEME
+    bucket: example-bucket
+    endpoint: nyc3.digitaloceanspaces.com:443
+    region: nyc3
+  allowedPrivateNetworks: []
+
+ingress:
+  enabled: true
+  annotations:
+    cert-manager.io/cluster-issuer: letsencrypt
+  hosts:
+    - host: example.tld
+      paths:
+        - path: /
+          pathType: ImplementationSpecific
+  tls:
+    - secretName: example-tld-certificate
+      hosts:
+        - example.tld
+
+elasticsearch:
+  enabled: false
+
+postgresql:
+  auth:
+    password: CHANGEME
+    postgresPassword: CHANGEME
+  primary:
+    persistence:
+      enabled: true
+      storageClass: vultr-block-storage
+      size: 25Gi
+    resources:
+      requests:
+        cpu: 0.25
+        memory: 256Mi
+      limits:
+        cpu: 0.5
+        memory: 512Mi
+  metrics:
+    enabled: true
+
+redis:
+  auth:
+    password: CHANGEME
+  master:
+    resources:
+      requests:
+        cpu: 0.25
+        memory: 256Mi
+      limits:
+        cpu: 0.5
+        memory: 256Mi
+    persistence:
+      storageclass: vultr-block-storage
+      size: 10Gi
+  replica:
+    replicaCount: 0
+  metrics:
+    enabled: true

.dockerignore

@@ -1,15 +1,44 @@
-.autogen
-.github
-.travis
+# Visual Studio Code
 .vscode
-.config
+
+# Intelij-IDEA
+.idea
+
+# Node.js
+node_modules
+**/node_modules
+report.*.json
+
+# Rust
+packages/backend/native-utils/target
+
+# Cypress
+cypress/screenshots
+cypress/videos
+
+# Coverage
+coverage
+
+# config
+/.config
+
+# misskey
+built
+db
+elasticsearch
+redis
+npm-debug.log
+*.pem
+run.bat
+api-docs.json
+*.log
+*.code-workspace
+.DS_Store
+files
+ormconfig.json
+packages/backend/assets/instance.css
+
+# dockerignore custom
+.git
 Dockerfile
-build/
-built/
-db/
 docker-compose.yml
-elasticsearch/
-node_modules/
-redis/
-files/
-misskey-assets/

.envrc

@@ -0,0 +1,4 @@
+if ! has nix_direnv_version || ! nix_direnv_version 2.3.0; then
+  source_url "https://raw.githubusercontent.com/nix-community/nix-direnv/2.3.0/direnvrc" "sha256-Dmd+j63L84wuzgyjITIfSxSD57Tx7v51DMxVZOsiUD8="
+fi
+use flake . --impure

.github/FUNDING.yml

@@ -1,3 +0,0 @@
-# These are supported funding model platforms
-
-patreon: syuilo

.github/ISSUE_TEMPLATE/01_bug-report.md

@@ -1,42 +0,0 @@
----
-name: 🐛 Bug Report
-about: Create a report to help us improve
-title: ''
-labels: ⚠️bug?
-assignees: ''
-
----
-
-<!--
-Thanks for reporting!
-First, in order to avoid duplicate Issues, please search to see if the problem you found has already been reported.
--->
-
-## 💡 Summary
-
-<!-- Tell us what the bug is -->
-
-## 🥰 Expected Behavior
-
-<!--- Tell us what should happen -->
-
-## 🤬 Actual Behavior
-
-<!--
-Tell us what happens instead of the expected behavior.
-Please include errors from the developer console and/or server log files if you have access to them.
--->
-
-## 📝 Steps to Reproduce
-
-1.
-2.
-3.
-
-## 📌 Environment
-
-<!-- Tell us where on the platform it happens -->
-
-Misskey version:
-Your OS:
-Your browser:

.github/ISSUE_TEMPLATE/02_feature-request.md

@@ -1,12 +0,0 @@
----
-name: ✨ Feature Request
-about: Suggest an idea for this project
-title: ''
-labels: ✨Feature
-assignees: ''
-
----
-
-## Summary
-
-<!-- Tell us what the suggestion is -->

.github/ISSUE_TEMPLATE/config.yml

@@ -1,7 +0,0 @@
-contact_links:
-  - name: 👪 Misskey Forum
-    url: https://forum.misskey.io/
-    about: Ask questions and share knowledge
-  - name: 💬 Misskey official Discord
-    url: https://discord.gg/Wp8gVStHW3
-    about: Chat freely about Misskey

.github/PULL_REQUEST_TEMPLATE.md

@@ -1,17 +0,0 @@
-<!-- ℹ お読みください / README
-PRありがとうございます！ PRを作成する前に、コントリビューションガイドをご確認ください:
-Thank you for your PR! Before creating a PR, please check the contribution guide:
-https://github.com/misskey-dev/misskey/blob/develop/CONTRIBUTING.md
--->
-
-# What
-<!-- このPRで何をしたのか？ どう変わるのか？ -->
-<!-- What did you do with this PR? How will it change things? -->
-
-# Why
-<!-- なぜそうするのか？ どういう意図なのか？ 何が困っているのか？ -->
-<!-- Why do you do it? What are your intentions? What is the problem? -->
-
-# Additional info (optional)
-<!-- テスト観点など -->
-<!-- Test perspective, etc -->

.github/dependabot.yml

@@ -1,22 +0,0 @@
-# To get started with Dependabot version updates, you'll need to specify which
-# package ecosystems to update and where the package manifests are located.
-# Please see the documentation for all configuration options:
-# https://help.github.com/github/administering-a-repository/configuration-options-for-dependency-updates
-
-version: 2
-updates:
-- package-ecosystem: npm
-  directory: "/"
-  schedule:
-    interval: daily
-  open-pull-requests-limit: 0
-- package-ecosystem: npm
-  directory: "/packages/backend"
-  schedule:
-    interval: daily
-  open-pull-requests-limit: 0
-- package-ecosystem: npm
-  directory: "/packages/client"
-  schedule:
-    interval: daily
-  open-pull-requests-limit: 0

.github/labeler.yml

@@ -1,12 +0,0 @@
-'⚙️Server':
-- packages/backend/**/*
-
-'🖥️Client':
-- packages/client/**/*
-
-'🧪Test':
-- cypress/**/*
-- packages/backend/test/**/*
-
-'‼️ wrong locales':
-- any: ['locales/*.yml', '!locales/ja-JP.yml']

.github/misskey/test.yml

@@ -1,15 +0,0 @@
-url: 'http://misskey.local'
-
-# ローカルでテストするときにポートを被らないようにするためデフォルトのものとは変える(以下同じ)
-port: 61812
-
-db:
-  host: localhost
-  port: 54312
-  db: test-misskey
-  user: postgres
-  pass: ''
-redis:
-  host: localhost
-  port: 56312
-id: aid

.github/workflows/docker-develop.yml

@@ -1,33 +0,0 @@
-name: Publish Docker image (develop)
-
-on:
-  push:
-    branches:
-      - develop
-  workflow_dispatch:
-
-jobs:
-  push_to_registry:
-    name: Push Docker image to Docker Hub
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Check out the repo
-        uses: actions/checkout@v2
-      - name: Docker meta
-        id: meta
-        uses: docker/metadata-action@v3
-        with:
-          images: misskey/misskey
-      - name: Log in to Docker Hub
-        uses: docker/login-action@v1
-        with:
-          username: ${{ secrets.DOCKER_USERNAME }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
-      - name: Build and Push to Docker Hub
-        uses: docker/build-push-action@v2
-        with:
-          context: .
-          push: true
-          tags: misskey/misskey:develop
-          labels: develop

.github/workflows/docker.yml

@@ -1,32 +0,0 @@
-name: Publish Docker image
-
-on:
-  release:
-    types: [published]
-  workflow_dispatch:
-
-jobs:
-  push_to_registry:
-    name: Push Docker image to Docker Hub
-    runs-on: ubuntu-latest
-
-    steps:
-      - name: Check out the repo
-        uses: actions/checkout@v2
-      - name: Docker meta
-        id: meta
-        uses: docker/metadata-action@v3
-        with:
-          images: misskey/misskey
-      - name: Log in to Docker Hub
-        uses: docker/login-action@v1
-        with:
-          username: ${{ secrets.DOCKER_USERNAME }}
-          password: ${{ secrets.DOCKER_PASSWORD }}
-      - name: Build and Push to Docker Hub
-        uses: docker/build-push-action@v2
-        with:
-          context: .
-          push: true
-          tags: ${{ steps.meta.outputs.tags }}
-          labels: ${{ steps.meta.outputs.labels }}

.github/workflows/labeler.yml

@@ -1,16 +0,0 @@
-name: "Pull Request Labeler"
-on:
-  pull_request_target:
-    branches-ignore:
-      - 'l10n_develop'
-
-jobs:
-  triage:
-    permissions:
-      contents: read
-      pull-requests: write
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/labeler@v4
-      with:
-        repo-token: "${{ secrets.GITHUB_TOKEN }}"

.github/workflows/lint.yml

@@ -1,39 +0,0 @@
-name: Lint
-
-on:
-  push:
-    branches:
-      - master
-      - develop
-  pull_request:
-
-jobs:
-  backend:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        submodules: true
-    - uses: actions/setup-node@v3
-      with:
-        node-version: 18.x
-        cache: 'yarn'
-        cache-dependency-path: |
-          packages/backend/yarn.lock
-    - run: yarn install
-    - run: yarn --cwd ./packages/backend lint
-
-  client:
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        submodules: true
-    - uses: actions/setup-node@v3
-      with:
-        node-version: 18.x
-        cache: 'yarn'
-        cache-dependency-path: |
-          packages/client/yarn.lock
-    - run: yarn install
-    - run: yarn --cwd ./packages/client lint

.github/workflows/ok-to-test.yml

@@ -1,36 +0,0 @@
-# If someone with write access comments "/ok-to-test" on a pull request, emit a repository_dispatch event
-name: Ok To Test
-
-on:
-  issue_comment:
-    types: [created]
-
-jobs:
-  ok-to-test:
-    runs-on: ubuntu-latest
-    # Only run for PRs, not issue comments
-    if: ${{ github.event.issue.pull_request }}
-    steps:
-    # Generate a GitHub App installation access token from an App ID and private key
-    # To create a new GitHub App:
-    #   https://developer.github.com/apps/building-github-apps/creating-a-github-app/
-    # See app.yml for an example app manifest
-    - name: Generate token
-      id: generate_token
-      uses: tibdex/github-app-token@v1
-      with:
-        app_id: ${{ secrets.DEPLOYBOT_APP_ID }}
-        private_key: ${{ secrets.DEPLOYBOT_PRIVATE_KEY }}
-
-    - name: Slash Command Dispatch
-      uses: peter-evans/slash-command-dispatch@v1
-      env:
-        TOKEN: ${{ steps.generate_token.outputs.token }}
-      with:
-        token: ${{ env.TOKEN }} # GitHub App installation access token
-        # token: ${{ secrets.PERSONAL_ACCESS_TOKEN }} # PAT or OAuth token will also work
-        reaction-token: ${{ secrets.GITHUB_TOKEN }}
-        issue-type: pull-request
-        commands: deploy
-        named-args: true
-        permission: write

.github/workflows/pr-preview-deploy.yml

@@ -1,95 +0,0 @@
-# Run secret-dependent integration tests only after /deploy approval
-on:
-  pull_request:
-    types: [opened, reopened, synchronize]
-  repository_dispatch:
-    types: [deploy-command]
-
-name: Deploy preview environment
-
-jobs:
-  # Repo owner has commented /deploy on a (fork-based) pull request
-  deploy-preview-environment:
-    runs-on: ubuntu-latest
-    if:
-      github.event_name == 'repository_dispatch' &&
-      github.event.client_payload.slash_command.sha != '' &&
-      contains(github.event.client_payload.pull_request.head.sha, github.event.client_payload.slash_command.sha)
-    steps:
-    - uses: actions/github-script@v5
-      id: check-id
-      env:
-        number: ${{ github.event.client_payload.pull_request.number }}
-        job: ${{ github.job }}
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        result-encoding: string
-        script: |
-          const { data: pull } = await github.rest.pulls.get({
-            ...context.repo,
-            pull_number: process.env.number
-          });
-          const ref = pull.head.sha;
-
-          const { data: checks } = await github.rest.checks.listForRef({
-            ...context.repo,
-            ref
-          });
-
-          const check = checks.check_runs.filter(c => c.name === process.env.job);
-
-          return check[0].id;
-
-    - uses: actions/github-script@v5
-      env:
-        check_id: ${{ steps.check-id.outputs.result }}
-        details_url: ${{ github.server_url }}/${{ github.repository }}/runs/${{ github.run_id }}
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        script: |
-          await github.rest.checks.update({
-            ...context.repo,
-            check_run_id: process.env.check_id,
-            status: 'in_progress',
-            details_url: process.env.details_url
-          });
-
-    # Check out merge commit
-    - name: Fork based /deploy checkout
-      uses: actions/checkout@v2
-      with:
-        ref: 'refs/pull/${{ github.event.client_payload.pull_request.number }}/merge'
-
-    # <insert integration tests needing secrets>
-    - name: Context
-      uses: okteto/context@latest
-      with:
-        token: ${{ secrets.OKTETO_TOKEN }}
-
-    - name: Deploy preview environment
-      uses: ikuradon/deploy-preview@latest
-      env:
-        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      with:
-        name: pr-${{ github.event.client_payload.pull_request.number }}-syuilo
-        timeout: 15m
-
-    # Update check run called "integration-fork"
-    - uses: actions/github-script@v5
-      id: update-check-run
-      if: ${{ always() }}
-      env:
-        # Conveniently, job.status maps to https://developer.github.com/v3/checks/runs/#update-a-check-run
-        conclusion: ${{ job.status }}
-        check_id: ${{ steps.check-id.outputs.result }}
-      with:
-        github-token: ${{ secrets.GITHUB_TOKEN }}
-        script: |
-          const { data: result } = await github.rest.checks.update({
-            ...context.repo,
-            check_run_id: process.env.check_id,
-            status: 'completed',
-            conclusion: process.env.conclusion
-          });
-
-          return result;

.github/workflows/pr-preview-destroy.yml

@@ -1,21 +0,0 @@
-# file: .github/workflows/preview-closed.yaml
-on:
-  pull_request:
-    types:
-      - closed
-
-name: Destroy preview environment
-
-jobs:
-  destroy-preview-environment:
-    runs-on: ubuntu-latest
-    steps:
-      - name: Context
-        uses: okteto/context@latest
-        with:
-          token: ${{ secrets.OKTETO_TOKEN }}
-
-      - name: Destroy preview environment
-        uses: okteto/destroy-preview@latest
-        with:
-          name: pr-${{ github.event.number }}-syuilo

.github/workflows/test.yml

@@ -1,122 +0,0 @@
-name: Test
-
-on:
-  push:
-    branches:
-      - master
-      - develop
-  pull_request:
-
-jobs:
-  mocha:
-    runs-on: ubuntu-latest
-
-    strategy:
-      matrix:
-        node-version: [18.x]
-
-    services:
-      postgres:
-        image: postgres:13
-        ports:
-          - 54312:5432
-        env:
-          POSTGRES_DB: test-misskey
-          POSTGRES_HOST_AUTH_METHOD: trust
-      redis:
-        image: redis:6
-        ports:
-          - 56312:6379
-
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        submodules: true
-    - name: Use Node.js ${{ matrix.node-version }}
-      uses: actions/setup-node@v3
-      with:
-        node-version: ${{ matrix.node-version }}
-        cache: 'yarn'
-        cache-dependency-path: |
-          packages/backend/yarn.lock
-          packages/client/yarn.lock
-    - name: Install dependencies
-      run: yarn install
-    - name: Check yarn.lock
-      run: git diff --exit-code yarn.lock
-    - name: Copy Configure
-      run: cp .github/misskey/test.yml .config
-    - name: Build
-      run: yarn build
-    - name: Test
-      run: yarn mocha
-
-  e2e:
-    runs-on: ubuntu-latest
-
-    strategy:
-      fail-fast: false
-      matrix:
-        node-version: [18.x]
-        browser: [chrome]
-
-    services:
-      postgres:
-        image: postgres:13
-        ports:
-          - 54312:5432
-        env:
-          POSTGRES_DB: test-misskey
-          POSTGRES_HOST_AUTH_METHOD: trust
-      redis:
-        image: redis:6
-        ports:
-          - 56312:6379
-
-    steps:
-    - uses: actions/checkout@v2
-      with:
-        submodules: true
-    # https://github.com/cypress-io/cypress-docker-images/issues/150
-    #- name: Install mplayer for FireFox
-    #  run: sudo apt install mplayer -y
-    #  if: ${{ matrix.browser == 'firefox' }}
-    #- uses: browser-actions/setup-firefox@latest
-    #  if: ${{ matrix.browser == 'firefox' }}
-    - name: Use Node.js ${{ matrix.node-version }}
-      uses: actions/setup-node@v3
-      with:
-        node-version: ${{ matrix.node-version }}
-        cache: 'yarn'
-        cache-dependency-path: |
-          packages/backend/yarn.lock
-          packages/client/yarn.lock
-    - name: Install dependencies
-      run: yarn install
-    - name: Check yarn.lock
-      run: git diff --exit-code yarn.lock
-    - name: Copy Configure
-      run: cp .github/misskey/test.yml .config
-    - name: Build
-      run: yarn build
-    # https://github.com/cypress-io/cypress/issues/4351#issuecomment-559489091
-    - name: ALSA Env
-      run: echo -e 'pcm.!default {\n type hw\n card 0\n}\n\nctl.!default {\n type hw\n card 0\n}' > ~/.asoundrc
-    - name: Cypress run
-      uses: cypress-io/github-action@v4
-      with:
-        install: false
-        start: npm run start:test
-        wait-on: 'http://localhost:61812'
-        headless: false
-        browser: ${{ matrix.browser }}
-    - uses: actions/upload-artifact@v2
-      if: failure()
-      with:
-        name: ${{ matrix.browser }}-cypress-screenshots
-        path: cypress/screenshots
-    - uses: actions/upload-artifact@v2
-      if: always()
-      with:
-        name: ${{ matrix.browser }}-cypress-videos
-        path: cypress/videos

.gitignore

@@ -1,9 +1,13 @@
 # Visual Studio Code
 /.vscode
 !/.vscode/extensions.json
+!/.vscode/launch.json
 
 # Intelij-IDEA
 /.idea
+packages/backend/.idea/backend.iml
+packages/backend/.idea/modules.xml
+packages/backend/.idea/vcs.xml
 
 # Node.js
 node_modules
@@ -19,25 +23,39 @@ coverage
 # config
 /.config/*
 !/.config/example.yml
+!/.config/devenv.yml
 !/.config/docker_example.env
+!/.config/docker_ci.env
+!/.config/helm_values_example.yml
+!/.config/LICENSE
+
+# docker dev config
+/dev/docker-compose.yml
+
+# ESLint
+.eslintcache
 
 # misskey
-/build
 built
-/data
-/.cache-loader
-/db
-/elasticsearch
+db
+elasticsearch
+redis
 npm-debug.log
 *.pem
 run.bat
 api-docs.json
 *.log
-/redis
 *.code-workspace
 .DS_Store
-/files
+files/
 ormconfig.json
+packages/backend/assets/instance.css
+packages/backend/assets/sounds/None.mp3
+packages/backend/assets/LICENSE
+
+!/packages/backend/queue/processors/db
+!/packages/backend/src/db
+!/packages/backend/src/server/api/endpoints/drive/files
 
 # blender backups
 *.blend1
@@ -45,3 +63,15 @@ ormconfig.json
 *.blend3
 *.blend4
 *.blend5
+
+# old yarn
+.yarn
+yarn*
+
+# Nix Development shell items
+.devenv
+.direnv
+
+# Cargo cache for Docker
+/.cargo-cache
+/.cargo-target

.gitlab-ci.yml

@@ -0,0 +1,94 @@
+# This file is a template, and might need editing before it works on your project.
+# You can copy and paste this template into a new `.gitlab-ci.yml` file.
+# You should not add this template to an existing `.gitlab-ci.yml` file by using the `include:` keyword.
+#
+# To contribute improvements to CI/CD templates, please follow the Development guide at:
+# https://docs.gitlab.com/ee/development/cicd/templates.html
+# This specific template is located at:
+# https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/ci/templates/Nodejs.gitlab-ci.yml
+
+# Official framework image. Look for the different tagged releases at:
+# https://hub.docker.com/r/library/node/tags/
+
+stages:
+  - build
+  - deploy
+
+testCommit:
+  stage: build
+  image: node:latest
+  # Pick zero or more services to be used on all builds.
+  # Only needed when using a docker container to run your tests in.
+  # Check out: https://docs.gitlab.com/ee/ci/services/index.html
+  services:
+    - postgres:15
+    - redis
+  variables:
+    POSTGRES_PASSWORD: test
+    # POSTGRES_DB: $POSTGRES_DB
+    # POSTGRES_USER: $POSTGRES_USER
+    # POSTGRES_PASSWORD: $POSTGRES_PASSWORD
+    # POSTGRES_HOST_AUTH_METHOD: trust
+  script:
+    - apt-get update && apt-get install -y git wget curl build-essential python3 musl
+    - curl https://sh.rustup.rs -sSf | sh -s -- -y
+    - source "$HOME/.cargo/env"
+    - ln -s /lib/x86_64-linux-musl/libc.so /lib/libc.musl-x86_64.so.1
+    - cp .config/ci.yml .config/default.yml
+    - corepack enable
+    - corepack prepare pnpm@latest --activate
+    - pnpm i --frozen-lockfile
+    - pnpm run build:debug
+    - pnpm run migrate
+  cache:
+    key: build
+    policy: pull-push
+    when: on_success
+    paths:
+     - node_modules/
+     - packages/*/node_modules/
+     - packages/backend/native-utils/node_modules/
+  only:
+    - main
+    - beta
+    - develop
+    - /^feature\/.*$/
+
+getImageTag:
+  stage: deploy
+  image: busybox
+  script:
+    - |
+      if test -n "$CI_COMMIT_TAG"; then
+        tag="$CI_COMMIT_TAG"
+      elif test "$CI_COMMIT_BRANCH" == "main"; then
+        tag="latest"
+      else
+        tag="$CI_COMMIT_BRANCH"
+      fi
+    - echo "REGISTRY_PUSH_TAG=$tag" | tee build.env
+  # parse tag to the build and merge jobs.
+  # See: https://docs.gitlab.com/ee/ci/variables/#pass-an-environment-variable-to-another-job
+  artifacts:
+    reports:
+      dotenv: build.env
+  only:
+    - main
+    - beta
+    - tags
+
+dockerBuild:
+  stage: deploy
+  needs: ["getImageTag"]
+  image:
+    name: gcr.io/kaniko-project/executor:debug
+    entrypoint: [""]
+  script:
+    - /kaniko/executor
+      --context "${CI_PROJECT_DIR}"
+      --dockerfile "${CI_PROJECT_DIR}/Dockerfile"
+      --destination "${CI_REGISTRY_IMAGE}:${REGISTRY_PUSH_TAG}"
+  only:
+    - main
+    - beta
+    - tags

.gitlab/issue_templates/bug.md

@@ -0,0 +1,29 @@
+<!-- 💖 Thanks for taking the time to fill out this bug report!
+💁 Having trouble with deployment? [Ask the support chat.](https://matrix.to/#/%23firefish:matrix.fedibird.com)
+🔒 Found a security vulnerability? [Please disclose it responsibly.](https://git.joinfirefish.org/firefish/firefish/src/branch/develop/SECURITY.md)
+🤝 By submitting this issue, you agree to follow our [Contribution Guidelines.](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/CONTRIBUTING.md) -->
+
+**What happened?** _(Please give us a brief description of what happened.)_
+
+**What did you expect to happen?** _(Please give us a brief description of what you expected to happen.)_
+
+**Version** _(What version of firefish is your instance running? You can find this by clicking your instance's logo at the bottom left and then clicking instance information.)_
+
+**Instance** _(What instance of firefish are you using?)_
+
+**What type of issue is this?** _(If this happens on your device and has to do with the user interface, it's client-side. If this happens on either with the API or the backend, or you got a server-side error in the client, it's server-side.)_
+
+**What browser are you using? (Client-side issues only)**
+
+**What operating system are you using? (Client-side issues only)**
+
+**How do you deploy Firefish on your server? (Server-side issues only)**
+
+**What operating system are you using? (Server-side issues only)**
+
+**Relevant log output** _(Please copy and paste any relevant log output. You can find your log by inspecting the page, and going to the "console" tab. This will be automatically formatted into code, so no need for backticks.)_
+
+**Contribution Guidelines**
+By submitting this issue, you agree to follow our [Contribution Guidelines](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/CONTRIBUTING.md)
+- [ ] I agree to follow this project's Contribution Guidelines
+- [ ] I have searched the issue tracker for similar issues, and this is not a duplicate.

.gitlab/issue_templates/feature.md

@@ -0,0 +1,17 @@
+<!-- 💖 Thanks for taking the time to fill out this bug report!
+💁 Having trouble with deployment? [Ask the support chat.](https://matrix.to/#/%23firefish:matrix.fedibird.com)
+🔒 Found a security vulnerability? [Please disclose it responsibly.](https://git.joinfirefish.org/firefish/firefish/src/branch/develop/SECURITY.md)
+🤝 By submitting this feature request, you agree to follow our [Contribution Guidelines.](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/CONTRIBUTING.md) -->
+
+**What feature would you like implemented?** _(Please give us a brief description of what you'd like.)_
+
+**Why should we add this feature?** _(Please give us a brief description of why your feature is important.)_
+
+**Version** _(What version of firefish is your instance running? You can find this by clicking your instance's logo at the bottom left and then clicking instance information.)_
+
+**Instance** _(What instance of firefish are you using?)_
+
+**Contribution Guidelines**
+By submitting this issue, you agree to follow our [Contribution Guidelines](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/CONTRIBUTING.md)
+- [ ] I agree to follow this project's Contribution Guidelines
+- [ ] I have searched the issue tracker for similar requests, and this is not a duplicate.

.gitlab/merge_request_templates/default.md

@@ -0,0 +1,15 @@
+<!-- Thanks for taking the time to make Firefish better! It's not required, but please consider using [Conventional Commits](https://www.conventionalcommits.org/en/v1.0.0/) when making your commits. If you use VSCode, please use the [Conventional Commits extension](https://marketplace.visualstudio.com/items?itemName=vivaxy.vscode-conventional-commits). -->
+
+**What does this PR do?** _(Please give us a brief description of what this PR does.)_
+
+**Contribution Guidelines**
+By submitting this merge request, you agree to follow our [Contribution Guidelines](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/CONTRIBUTING.md)
+- [ ] I agree to follow this project's Contribution Guidelines
+- [ ] I have made sure to test this pull request
+- [ ] I have made sure to run `pnpm run format` before submitting this pull request
+
+If this merge request makes changes to the Firefish API, please update `docs/api-change.md`
+- [ ] I updated the documentation
+
+<!-- Uncomment if your merge request has multiple authors -->
+<!-- Co-authored-by: Name <email@email.com> -->

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "misskey-assets"]
-	path = misskey-assets
-	url = https://github.com/misskey-dev/assets.git

.node-version

@@ -1 +1 @@
-v16.15.0
+v18.16.0

.npmrc

@@ -1,2 +1 @@
-save-exact = true
-package-lock = false
+use-lockfile-v6=true

.okteto/okteto-pipeline.yml

@@ -1,6 +0,0 @@
-build:
-  misskey:
-    args:
-      - NODE_ENV=development
-deploy:
-  - helm upgrade --install misskey chart --set image=${OKTETO_BUILD_MISSKEY_IMAGE} --set url="https://misskey-$(kubectl config view --minify -o jsonpath='{..namespace}').cloud.okteto.net" --set environment=development

.vscode/extensions.json

@@ -1,9 +1,18 @@
 {
-	"recommendations": [
-		"editorconfig.editorconfig",
-		"eg2.vscode-npm-script",
-		"dbaeumer.vscode-eslint",
-		"Vue.volar",
-		"Vue.vscode-typescript-vue-plugin"
-	]
+  "recommendations": [
+    "editorconfig.editorconfig",
+    "vue.volar",
+    "vue.vscode-typescript-vue-plugin",
+    "arcanis.vscode-zipfs",
+    "orta.vscode-twoslash-queries",
+    "antfu.iconify",
+    "vivaxy.vscode-conventional-commits",
+    "ms-azuretools.vscode-docker",
+    "gitlab.gitlab-workflow",
+    "mrmlnc.vscode-json5",
+    "esbenp.prettier-vscode",
+    "redhat.vscode-yaml",
+    "yoavbls.pretty-ts-errors",
+    "biomejs.biome"
+  ]
 }

.vscode/launch.json

@@ -0,0 +1,20 @@
+{
+  // Use IntelliSense to learn about possible attributes.
+  // Hover to view descriptions of existing attributes.
+  // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
+  "version": "0.2.0",
+  "configurations": [
+    {
+      "type": "node",
+      "request": "launch",
+      "name": "Launch PNPM Debug Script",
+      "skipFiles": [
+        "<node_internals>/**"
+      ],
+			"runtimeExecutable": "pnpm",
+			"runtimeArgs": [
+				"run", "debug"
+			]
+    }
+  ]
+}

.weblate

@@ -0,0 +1,3 @@
+[weblate]
+url = https://hosted.weblate.org/api/
+translation = firefish/locales

.yarnrc

@@ -1 +0,0 @@
-network-timeout 600000

CODE_OF_CONDUCT.md

@@ -1,46 +1,136 @@
+
 # Contributor Covenant Code of Conduct
 
 ## Our Pledge
 
-In the interest of fostering an open and welcoming environment, we as contributors and maintainers pledge to making participation in our project and our community a harassment-free experience for everyone, regardless of age, body size, disability, ethnicity, gender identity and expression, level of experience, nationality, personal appearance, race, religion, or sexual identity and orientation.
+We as members, contributors, and leaders pledge to make participation in our
+community a harassment-free experience for everyone, regardless of age, body
+size, visible or invisible disability, ethnicity, sex characteristics, gender
+identity and expression, level of experience, education, socio-economic status,
+nationality, personal appearance, race, caste, color, religion, or sexual
+identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming,
+diverse, inclusive, and healthy community.
 
 ## Our Standards
 
-Examples of behavior that contributes to creating a positive environment include:
+Examples of behavior that contributes to a positive environment for our
+community include:
 
-* Using welcoming and inclusive language
-* Being respectful of differing viewpoints and experiences
-* Gracefully accepting constructive criticism
-* Focusing on what is best for the community
-* Showing empathy towards other community members
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes,
+  and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the overall
+  community
 
-Examples of unacceptable behavior by participants include:
+Examples of unacceptable behavior include:
 
-* The use of sexualized language or imagery and unwelcome sexual attention or advances
-* Trolling, insulting/derogatory comments, and personal or political attacks
+* The use of sexualized language or imagery, and sexual attention or advances of
+  any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
 * Public or private harassment
-* Publishing others' private information, such as a physical or electronic address, without explicit permission
-* Other conduct which could reasonably be considered inappropriate in a professional setting
+* Publishing others' private information, such as a physical or email address,
+  without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
 
-## Our Responsibilities
+## Enforcement Responsibilities
 
-Project maintainers are responsible for clarifying the standards of acceptable behavior and are expected to take appropriate and fair corrective action in response to any instances of unacceptable behavior.
+Community leaders are responsible for clarifying and enforcing our standards of
+acceptable behavior and will take appropriate and fair corrective action in
+response to any behavior that they deem inappropriate, threatening, offensive,
+or harmful.
 
-Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.
+Community leaders have the right and responsibility to remove, edit, or reject
+comments, commits, code, wiki edits, issues, and other contributions that are
+not aligned to this Code of Conduct, and will communicate reasons for moderation
+decisions when appropriate.
 
 ## Scope
 
-This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.
+This Code of Conduct applies within all community spaces, and also applies when
+an individual is officially representing the community in public spaces.
+Examples of representing our community include using an official e-mail address,
+posting via an official social media account, or acting as an appointed
+representative at an online or offline event.
 
 ## Enforcement
 
-Instances of abusive, harassing, or otherwise unacceptable behavior may be reported by contacting the project team at syuilotan@yahoo.co.jp. The project team will review and investigate all complaints, and will respond in a way that it deems appropriate to the circumstances. The project team is obligated to maintain confidentiality with regard to the reporter of an incident. Further details of specific enforcement policies may be posted separately.
+Instances of abusive, harassing, or otherwise unacceptable behavior may be
+reported to the community leaders responsible for enforcement at
+@thatonecalculator on Codeberg,
+`@kainoa@firefish.social` on the Fediverse,
+or kainoa@t1c.dev via email.
+All complaints will be reviewed and investigated promptly and fairly.
 
-Project maintainers who do not follow or enforce the Code of Conduct in good faith may face temporary or permanent repercussions as determined by other members of the project's leadership.
+All community leaders are obligated to respect the privacy and security of the
+reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining
+the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed
+unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing
+clarity around the nature of the violation and an explanation of why the
+behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series of
+actions.
+
+**Consequence**: A warning with consequences for continued behavior. No
+interaction with the people involved, including unsolicited interaction with
+those enforcing the Code of Conduct, for a specified period of time. This
+includes avoiding interactions in community spaces as well as external channels
+like social media. Violating these terms may lead to a temporary or permanent
+ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including
+sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public
+communication with the community for a specified period of time. No public or
+private interaction with the people involved, including unsolicited interaction
+with those enforcing the Code of Conduct, is allowed during this period.
+Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community
+standards, including sustained inappropriate behavior, harassment of an
+individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within the
+community.
 
 ## Attribution
 
-This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 1.4, available at [http://contributor-covenant.org/version/1/4][version]
+This Code of Conduct is adapted from the [Contributor Covenant][homepage],
+version 2.1, available at
+[https://www.contributor-covenant.org/version/2/1/code_of_conduct.html][v2.1].
+
+Community Impact Guidelines were inspired by
+[Mozilla's code of conduct enforcement ladder][Mozilla CoC].
+
+For answers to common questions about this code of conduct, see the FAQ at
+[https://www.contributor-covenant.org/faq][FAQ]. Translations are available at
+[https://www.contributor-covenant.org/translations][translations].
+
+[homepage]: https://www.contributor-covenant.org
+[v2.1]: https://www.contributor-covenant.org/version/2/1/code_of_conduct.html
+[Mozilla CoC]: https://github.com/mozilla/diversity
+[FAQ]: https://www.contributor-covenant.org/faq
+[translations]: https://www.contributor-covenant.org/translations
 
-[homepage]: http://contributor-covenant.org
-[version]: http://contributor-covenant.org/version/1/4/

CONTRIBUTING.md

@@ -1,51 +1,54 @@
 # Contribution guide
-We're glad you're interested in contributing Misskey! In this document you will find the information you need to contribute to the project.
+We're glad you're interested in contributing Firefish! In this document you will find the information you need to contribute to the project.
 
-> **Note**
-> This project uses Japanese as its major language, **but you do not need to translate and write the Issues/PRs in Japanese.**
-> Also, you might receive comments on your Issue/PR in Japanese, but you do not need to reply to them in Japanese as well.\
-> The accuracy of machine translation into Japanese is not high, so it will be easier for us to understand if you write it in the original language.
-> It will also allow the reader to use the translation tool of their preference if necessary.
+## Translation (i18n)
+Firefish uses [Weblate](https://hosted.weblate.org/engage/firefish/) for translation and internationalization management.
 
-## Roadmap
-See [ROADMAP.md](./ROADMAP.md)
+If your language is not listed in Weblate, please open an issue.
+
+You can contribute without knowing how to code by helping translate here:
+
+[![Translation status](https://hosted.weblate.org/widgets/firefish/-/287x66-grey.png)](https://hosted.weblate.org/engage/firefish/)
+
+[![Translation bars](https://hosted.weblate.org/widgets/firefish/-/multi-auto.svg)](https://hosted.weblate.org/engage/firefish/)
 
 ## Issues
 Before creating an issue, please check the following:
 - To avoid duplication, please search for similar issues before creating a new issue.
 - Do not use Issues to ask questions or troubleshooting.
 	- Issues should only be used to feature requests, suggestions, and bug tracking.
-	- Please ask questions or troubleshooting in the [Misskey Forum](https://forum.misskey.io/) or [Discord](https://discord.gg/Wp8gVStHW3).
+	- Please ask questions or troubleshooting in the [Matrix room](https://matrix.to/#/#firefish:matrix.fedibird.com).
 
 > **Warning**
 > Do not close issues that are about to be resolved. It should remain open until a commit that actually resolves it is merged.
 
 ## Before implementation
-When you want to add a feature or fix a bug, **first have the design and policy reviewed in an Issue** (if it is not there, please make one). Without this step, there is a high possibility that the PR will not be merged even if it is implemented.
+When you want to add a feature or fix a bug, **first have the design and policy reviewed in an Issue** (if it is not there, please make one). Without this step, there is a high possibility that the MR will not be merged even if it is implemented.
 
-At this point, you also need to clarify the goals of the PR you will create, and make sure that the other members of the team are aware of them.
-PRs that do not have a clear set of do's and don'ts tend to be bloated and difficult to review.
+At this point, you also need to clarify the goals of the MR you will create, and make sure that the other members of the team are aware of them.
+MRs that do not have a clear set of do's and don'ts tend to be bloated and difficult to review.
 
 Also, when you start implementation, assign yourself to the Issue (if you cannot do it yourself, ask another member to assign you). By expressing your intention to work the Issue, you can prevent conflicts in the work.
 
 ## Well-known branches
-- **`master`** branch is tracking the latest release and used for production purposes.
-- **`develop`** branch is where we work for the next release.
-	- When you create a PR, basically target it to this branch.
-- **`l10n_develop`** branch is reserved for localization management.
+- The **`main`** branch is tracking the latest release and used for production purposes.
+- The **`develop`** branch is where we work for the next release.
+	- When you create a MR, basically target it to this branch. **But create a different branch**
+- The **`l10n_develop`** branch is reserved for localization management.
+- **`feature/*`** branches are reserved for the development of a specific feature
 
-## Creating a PR
-Thank you for your PR! Before creating a PR, please check the following:
-- If possible, prefix the title with a keyword that identifies the type of this PR, as shown below.
-  - `fix` / `refactor` / `feat` / `enhance` / `perf` / `chore` etc
-  - Also, make sure that the granularity of this PR is appropriate. Please do not include more than one type of change or interest in a single PR.
-- If there is an Issue which will be resolved by this PR, please include a reference to the Issue in the text.
-- Please add the summary of the changes to [`CHANGELOG.md`](/CHANGELOG.md). However, this is not necessary for changes that do not affect the users, such as refactoring.
+## Creating a merge request (MR)
+Thank you for your MR! Before creating a MR, please check the following:
+- If possible, prefix the title with a keyword that identifies the type of this MR, as shown below.
+  - `fix` / `refactor` / `feat` / `enhance` / `perf` / `chore` etc. You are also welcome to use gitmoji. This is important as we use these to A) easier read the git history and B) generate our changelog. Without propper prefixing it is possible that your MR is rejected.
+  - Also, make sure that the granularity of this MR is appropriate. Please do not include more than one type of change or interest in a single MR.
+- If there is an Issue which will be resolved by this MR, please include a reference to the Issue in the text. Good examples include `Closing: #21` or `Resolves: #21`
 - Check if there are any documents that need to be created or updated due to this change.
+	- For example, you need to update `docs/api-change.md` if the MR includes API changes.
 - If you have added a feature or fixed a bug, please add a test case if possible.
-- Please make sure that tests and Lint are passed in advance.
-  - You can run it with `npm run test` and `npm run lint`. [See more info](#testing)
-- If this PR includes UI changes, please attach a screenshot in the text.
+- Please make sure that formatting, tests and Lint are passed in advance.
+  - You can run it with `pnpm run format`, `pnpm run test` and `pnpm run lint`. [See more info](#testing)
+- If this MR includes UI changes, please attach a screenshot in the text.
 
 Thanks for your cooperation 🤗
 
@@ -54,25 +57,27 @@ Be willing to comment on the good points and not just the things you want fixed
 
 ### Review perspective
 - Scope
-  - Are the goals of the PR clear?
-  - Is the granularity of the PR appropriate?
+  - Are the goals of the MR clear?
+  - Is the granularity of the MR appropriate?
 - Security
-	- Does merging this PR create a vulnerability?
+	- Does merging this MR create a vulnerability?
 - Performance
-	- Will merging this PR cause unexpected performance degradation?
+	- Will merging this MR cause unexpected performance degradation?
 	- Is there a more efficient way?
 - Testing
 	- Does the test ensure the expected behavior?
 	- Are there any omissions or gaps?
 	- Does it check for anomalies?
 
-## Deploy
-The `/deploy` command by issue comment can be used to deploy the contents of a PR to the preview environment.
+## Deploy (SOON)
+The `/deploy` command by issue comment can be used to deploy the contents of a MR to the preview environment.
 ```
 /deploy sha=<commit hash>
 ```
 An actual domain will be assigned so you can test the federation.
 
+# THE FOLLOWING IS OUTDATED:
+
 ## Merge
 
 ## Release
@@ -88,18 +93,8 @@ An actual domain will be assigned so you can test the federation.
 	- The target branch must be `master`
 	- The tag name must be the version
 
-## Localization (l10n)
-Misskey uses [Crowdin](https://crowdin.com/project/misskey) for localization management.
-You can improve our translations with your Crowdin account.
-Your changes in Crowdin are automatically submitted as a PR (with the title "New Crowdin translations") to the repository.
-The owner [@syuilo](https://github.com/syuilo) merges the PR into the develop branch before the next release.
-
-If your language is not listed in Crowdin, please open an issue.
-
-![Crowdin](https://d322cqt584bo4o.cloudfront.net/misskey/localized.svg)
-
 ## Development
-During development, it is useful to use the `npm run dev` command.
+During development, it is useful to use the `yarn dev` command.
 This command monitors the server-side and client-side source files and automatically builds them if they are modified.
 In addition, it will also automatically start the Misskey server process.
 
@@ -119,12 +114,12 @@ Alternatively, prepare an empty (data can be erased) DB and edit `.config/test.y
 
 Run all test.
 ```
-npm run test
+yarn test
 ```
 
 #### Run specify test
 ```
-npx cross-env TS_NODE_FILES=true TS_NODE_TRANSPILE_ONLY=true TS_NODE_PROJECT="./test/tsconfig.json" npx mocha test/foo.ts --require ts-node/register
+TS_NODE_FILES=true TS_NODE_TRANSPILE_ONLY=true TS_NODE_PROJECT="./test/tsconfig.json" yarn dlx mocha test/foo.ts --require ts-node/register
 ```
 
 ### e2e tests
@@ -257,7 +252,7 @@ MongoDBは`null`で返してきてたので、その感覚で`if (x === null)`
 ### Migration作成方法
 packages/backendで:
 ```sh
-npx typeorm migration:generate -d ormconfig.js -o <migration name>
+pnpm dlx typeorm migration:generate -d ormconfig.js -o <migration name>
 ```
 
 - 生成後、ファイルをmigration下に移してください

COPYING

@@ -1,14 +1,24 @@
-Unless otherwise stated this repository is
-Copyright © 2014-2022 syuilo and contributers
+Unless specified otherwise, the entirety of this repository is subject to the following:
+Copyright © 2014-2023 syuilo and contributors
+Copyright © 2022-2023 Kainoa Kanter and contributors
 
 And is distributed under The GNU Affero General Public License Version 3, you should have received a copy of the license file as LICENSE.
 
+---
 
-Misskey includes several third-party Open-Source softwares.
+These specific configuration directories:
 
-Emoji keywords for Unicode 11 and below by Mu-An Chiou
-License: MIT
-https://github.com/muan/emojilib/blob/master/LICENSE
+- .config/
+- custom/assets/
+
+and their contents are
+Copyright © 2022-2023 Kainoa Kanter and contributors
+
+And are distributed under The Apache License, Version 2.0, you should have received a copy of the license file as LICENSE in each specified directory.
+
+---
+
+Firefish includes several third-party open-source softwares and software libraries.
 
 RsaSignature2017 implementation by Transmute Industries Inc
 License: MIT
@@ -17,3 +27,11 @@ https://github.com/transmute-industries/RsaSignature2017/blob/master/LICENSE
 Machine learning model for sensitive images by Infinite Red, Inc.
 License: MIT
 https://github.com/infinitered/nsfwjs/blob/master/LICENSE
+
+Chiptune2.js by Simon Gündling
+License: MIT
+https://github.com/deskjet/chiptune2.js#license
+
+Licenses for all softwares and software libraries installed via the Node Package Manager ("npm") can be found by running the following shell command in the root directory of this repository:
+
+pnpm licenses list

Dockerfile

@@ -1,32 +1,75 @@
-FROM node:16.15.1-bullseye AS builder
+## Install dev and compilation dependencies, build files
+FROM node:latest as build
+WORKDIR /firefish
 
-ARG NODE_ENV=production
+# Install compilation dependencies
+RUN apt-get update && apt-get install -y libvips42 python3 git wget curl build-essential
+RUN mkdir -m777 /opt/rust /opt/cargo
+ENV RUSTUP_HOME=/opt/rust CARGO_HOME=/opt/cargo PATH=/opt/cargo/bin:$PATH
+RUN wget --https-only --secure-protocol=TLSv1_2 -O- https://sh.rustup.rs | sh /dev/stdin -y
+RUN printf '#!/bin/sh\nexport CARGO_HOME=/opt/cargo\nexec /bin/sh "$@"\n' >/usr/local/bin/sh
+RUN chmod +x /usr/local/bin/sh
 
-WORKDIR /misskey
+# Copy only the cargo dependency-related files first, to cache efficiently
+COPY packages/backend/native-utils/Cargo.toml packages/backend/native-utils/Cargo.toml
+COPY packages/backend/native-utils/Cargo.lock packages/backend/native-utils/Cargo.lock
+COPY packages/backend/native-utils/src/lib.rs packages/backend/native-utils/src/
+COPY packages/backend/native-utils/migration/Cargo.toml packages/backend/native-utils/migration/Cargo.toml
+COPY packages/backend/native-utils/migration/src/lib.rs packages/backend/native-utils/migration/src/
+
+# Install cargo dependencies
+RUN cargo fetch --locked --manifest-path /firefish/packages/backend/native-utils/Cargo.toml
+
+# Copy only the dependency-related files first, to cache efficiently
+COPY package.json pnpm*.yaml ./
+COPY packages/backend/package.json packages/backend/package.json
+COPY packages/client/package.json packages/client/package.json
+COPY packages/sw/package.json packages/sw/package.json
+COPY packages/firefish-js/package.json packages/firefish-js/package.json
+COPY packages/backend/native-utils/package.json packages/backend/native-utils/package.json
+COPY packages/backend/native-utils/npm/linux-x64-musl/package.json packages/backend/native-utils/npm/linux-x64-musl/package.json
+COPY packages/backend/native-utils/npm/linux-arm64-musl/package.json packages/backend/native-utils/npm/linux-arm64-musl/package.json
+
+# Configure pnpm, and install dev mode dependencies for compilation
+RUN corepack enable && corepack prepare pnpm@latest --activate && pnpm i --frozen-lockfile
+
+# Copy in the rest of the native-utils rust files
+COPY packages/backend/native-utils packages/backend/native-utils/
+
+# Compile native-utils
+RUN pnpm run --filter native-utils build
+
+# Copy in the rest of the files to compile
+COPY . ./
+RUN env NODE_ENV=production sh -c "pnpm run --filter '!native-utils' build && pnpm run gulp"
+
+# Trim down the dependencies to only those for production
+RUN pnpm i --prod --frozen-lockfile
+
+## Runtime container
+FROM node:latest
+WORKDIR /firefish
+
+# Install runtime dependencies
+RUN apt-get update && apt-get install -y libvips-dev zip unzip tini ffmpeg
 
 COPY . ./
 
-RUN apt-get update
-RUN apt-get install -y build-essential
-RUN git submodule update --init
-RUN yarn install
-RUN yarn build
-RUN rm -rf .git
+# Copy node modules
+COPY --from=build /firefish/node_modules /firefish/node_modules
+COPY --from=build /firefish/packages/backend/node_modules /firefish/packages/backend/node_modules
+COPY --from=build /firefish/packages/sw/node_modules /firefish/packages/sw/node_modules
+COPY --from=build /firefish/packages/client/node_modules /firefish/packages/client/node_modules
+COPY --from=build /firefish/packages/firefish-js/node_modules /firefish/packages/firefish-js/node_modules
 
-FROM node:16.15.1-bullseye-slim AS runner
-
-WORKDIR /misskey
-
-RUN apt-get update
-RUN apt-get install -y ffmpeg tini
-
-COPY --from=builder /misskey/node_modules ./node_modules
-COPY --from=builder /misskey/built ./built
-COPY --from=builder /misskey/packages/backend/node_modules ./packages/backend/node_modules
-COPY --from=builder /misskey/packages/backend/built ./packages/backend/built
-COPY --from=builder /misskey/packages/client/node_modules ./packages/client/node_modules
-COPY . ./
+# Copy the finished compiled files
+COPY --from=build /firefish/built /firefish/built
+COPY --from=build /firefish/packages/backend/built /firefish/packages/backend/built
+COPY --from=build /firefish/packages/backend/assets/instance.css /firefish/packages/backend/assets/instance.css
+COPY --from=build /firefish/packages/backend/native-utils/built /firefish/packages/backend/native-utils/built
 
+RUN corepack enable && corepack prepare pnpm@latest --activate
 ENV NODE_ENV=production
-ENTRYPOINT ["/usr/bin/tini", "--"]
-CMD ["npm", "run", "migrateandstart"]
+VOLUME "/firefish/files"
+ENTRYPOINT [ "/usr/bin/tini", "--" ]
+CMD [ "pnpm", "run", "migrateandstart" ]

README.md

@@ -1,57 +1,279 @@
 <div align="center">
-<a href="https://misskey-hub.net">
-	<img src="./assets/title_float.svg" alt="Misskey logo" style="border-radius:50%" width="400"/>
+<a href="https://joinfirefish.org/">
+	<img src="./title.svg" alt="Firefish logo" style="border-radius:50%" width="400"/>
 </a>
-	
-**🌎 **[Misskey](https://misskey-hub.net/)** is an open source, decentralized social media platform that's free forever! 🚀**
-	
----
 
-<a href="https://misskey-hub.net/instances.html">
-		<img src="https://custom-icon-badges.herokuapp.com/badge/find_an-instance-acea31?logoColor=acea31&style=for-the-badge&logo=misskey&labelColor=363B40" alt="find an instance"/></a>
+**🌎 **[Firefish](https://joinfirefish.org/)** is an open source, decentralized social media platform that's free forever! 🚀**
 
-<a href="https://misskey-hub.net/docs/install.html">
-		<img src="https://custom-icon-badges.herokuapp.com/badge/create_an-instance-FBD53C?logoColor=FBD53C&style=for-the-badge&logo=server&labelColor=363B40" alt="create an instance"/></a>
-
-<a href="./CONTRIBUTING.md">
-		<img src="https://custom-icon-badges.herokuapp.com/badge/become_a-contributor-A371F7?logoColor=A371F7&style=for-the-badge&logo=git-merge&labelColor=363B40" alt="become a contributor"/></a>
-
-<a href="https://discord.gg/Wp8gVStHW3">
-		<img src="https://custom-icon-badges.herokuapp.com/badge/join_the-community-5865F2?logoColor=5865F2&style=for-the-badge&logo=discord&labelColor=363B40" alt="join the community"/></a>
-
-<a href="https://www.patreon.com/syuilo">
-		<img src="https://custom-icon-badges.herokuapp.com/badge/become_a-patron-F96854?logoColor=F96854&style=for-the-badge&logo=patreon&labelColor=363B40" alt="become a patron"/></a>
-	
----
+[![no github badge](https://nogithub.codeberg.page/badge.svg)](https://nogithub.codeberg.page/)
+<!-- [![status badge](https://ci.codeberg.org/api/badges/firefish/firefish/status.svg)](https://ci.codeberg.org/firefish/firefish) -->
+[![opencollective badge](https://opencollective.com/firefish/tiers/badge.svg)](https://opencollective.com/Firefish)
+[![liberapay badge](https://img.shields.io/liberapay/receives/ThatOneCalculator?logo=liberapay)](https://liberapay.com/ThatOneCalculator)
+[![translate-badge](https://hosted.weblate.org/widgets/firefish/-/svg-badge.svg)](https://hosted.weblate.org/engage/firefish/)
+<!-- [![docker badge](https://img.shields.io/docker/pulls/thatonecalculator/firefish?logo=docker)](https://hub.docker.com/r/thatonecalculator/firefish) -->
+[![Contributor Covenant](https://img.shields.io/badge/Contributor%20Covenant-2.1-4baaaa.svg)](./CODE_OF_CONDUCT.md)
 
 </div>
 
 <div>
 
-<a href="https://xn--931a.moe/"><img src="https://github.com/misskey-dev/misskey/blob/develop/assets/ai.png?raw=true" align="right" height="320px"/></a>
+<img src="./animated.svg" align="right" height="320px"/>
 
-## ✨ Features
-- **ActivityPub support**\
-Not on Misskey? No problem! Not only can Misskey instances talk to each other, but you can make friends with people on other networks like Mastodon and Pixelfed!
-- **Reactions**\
-You can add emoji reactions to any post! No longer are you bound by a like button, show everyone exactly how you feel with the tap of a button.
-- **Drive**\
-With Misskey's built in drive, you get cloud storage right in your social media, where you can upload any files, make folders, and find media from posts you've made!
-- **Rich Web UI**\
-	Misskey has a rich and easy to use Web UI!
-	It is highly customizable, from changing the layout and adding widgets to making custom themes.
-	Furthermore, plugins can be created using AiScript, an original programming language.
-- And much more...
+# ✨ About Firefish
+
+- Firefish is based off of Misskey, a powerful microblogging server on ActivityPub with features such as emoji reactions, a customizable web UI, rich chatting, and much more!
+- Firefish adds many quality of life changes and bug fixes for users and server admins alike.
+- Notable differences:
+  - Improved UI/UX (especially on mobile)
+  - Post editing
+  - Content importing
+  - Improved notifications
+  - Improved server security
+  - Improved accessibility
+  - Improved threads
+  - Recommended Servers timeline
+  - OCR image captioning
+  - New and improved Groups
+  - Better intro tutorial
+  - Compatibility with Mastodon clients/apps
+  - Backfill user information
+  - Advanced search
+  - Many more user and admin settings
+  - Many bug fixes and performance improvements 
+  - Link verification
+  - So much more!
 
 </div>
 
 <div style="clear: both;"></div>
 
-## Documentation
+# 🥂 Links
 
-Misskey Documentation can be found at [Misskey Hub](https://misskey-hub.net/), some of the links and graphics above also lead to specific portions of it.
+### Want to get involved? Great!
 
-## Sponsors
-<div align="center">
-	<a class="rss3" title="RSS3" href="https://rss3.io/" target="_blank"><img src="https://rss3.mypinata.cloud/ipfs/QmUG6H3Z7D5P511shn7sB4CPmpjH5uZWu4m5mWX7U3Gqbu" alt="RSS3" height="60"></a>
-</div>
+- If you have the means to, [donations](https://opencollective.com/Firefish) are a great way to keep us going.
+- If you know how to program in TypeScript, Vue, or Rust, read the [contributing](./CONTRIBUTING.md) document.
+- If you know a non-English language, translating Firefish on [Weblate](https://hosted.weblate.org/engage/firefish/) help bring Firefish to more people. No technical experience needed!
+- Want to write/report about us, have any professional inquiries, or just have questions to ask? Contact us [here!](https://joinfirefish.org/contact/)
+
+### All links
+
+- 🌐 Homepage: <https://joinfirefish.org>
+- 💸 Donations:
+  - OpenCollective: <https://opencollective.com/Firefish>
+  - Liberapay: <https://liberapay.com/ThatOneCalculator>
+  - Donate publicly to get your name on the Patron list!
+- 🚢 Flagship server: <https://firefish.social>
+- 💁 Matrix support room: <https://matrix.to/#/#firefish:matrix.fedibird.com>
+- 📣 Official account: <a href="https://fedi.software/@firefish" rel="me">@firefish</a>
+- 📜 Server list: <https://joinfirefish.org/join>
+- ✍️ Weblate: <https://hosted.weblate.org/engage/firefish/>
+- ️️📬 Contact: <https://joinfirefish.org/contact/>
+
+# 🌠 Getting started
+
+Want to just join a Firefish server? View the list here, pick one, and join:
+
+### https://joinfirefish.org/join
+
+---
+
+Want to make your own? Keep reading!
+
+This guide will work for both **starting from scratch** and **migrating from Misskey**.
+
+## 🔰 Easy installers
+
+If you have access to a server that supports one of the sources below, I recommend you use it! Note that these methods *won't* allow you to migrate from Misskey without manual intervention.
+
+[![Install on Ubuntu](https://pool.jortage.com/voringme/misskey/3b62a443-1b44-45cf-8f9e-f1c588f803ed.png)](https://git.joinfirefish.org/firefish/ubuntu-bash-install)　　[![Install on the Arch User Repository](https://pool.jortage.com/voringme/misskey/ba2a5c07-f078-43f1-8483-2e01acca9c40.png)](https://aur.archlinux.org/packages/firefish)　　[![Install Firefish with YunoHost](https://install-app.yunohost.org/install-with-yunohost.svg)](https://install-app.yunohost.org/?app=firefish)
+
+## 🛳️ Containerization
+
+- [🐳 How to run Firefish with Docker](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/docs/docker.md)
+- [🛞 How to run Firefish with Kubernetes/Helm](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/docs/kubernetes.md)
+
+## 🧑‍💻 Dependencies
+
+- 🐢 At least [NodeJS](https://nodejs.org/en/) v18.16.0 (v20 recommended)
+- 🐘 At least [PostgreSQL](https://www.postgresql.org/) v12 (v14 recommended)
+- 🍱 At least [Redis](https://redis.io/) v7
+- Web Proxy (one of the following)
+  - 🍀 Nginx (recommended)
+  - 🦦 Caddy
+  - 🪶 Apache
+- ⚡ [libvips](https://www.libvips.org/)
+
+### 😗 Optional dependencies
+
+- [FFmpeg](https://ffmpeg.org/) for video transcoding
+- Full text search (one of the following)
+  - 🦔 [Sonic](https://crates.io/crates/sonic-server)
+  - [MeiliSearch](https://www.meilisearch.com/)
+  - [ElasticSearch](https://www.elastic.co/elasticsearch/)
+- Caching server (one of the following)
+  - 🐲 [DragonflyDB](https://www.dragonflydb.io/) (recommended)
+  - 👻 [KeyDB](https://keydb.dev/)
+  - 🍱 Another [Redis](https://redis.io/) server
+
+### 🏗️ Build dependencies
+
+- 🦀 At least [Rust](https://www.rust-lang.org/) v1.68.0
+- 🦬 C/C++ compiler & build tools
+  - `build-essential` on Debian/Ubuntu Linux
+  - `base-devel` on Arch Linux
+- 🐍 [Python 3](https://www.python.org/)
+
+## 👀 Get folder ready
+
+```sh
+git clone https://git.joinfirefish.org/firefish/firefish.git
+cd firefish/
+```
+
+> **Note**
+> By default, you're on the develop branch. Run `git checkout main` or `git checkout beta` to switch to the Main/Beta branches.
+
+## 📩 Install dependencies
+
+```sh
+# nvm install 19 && nvm use 19
+corepack enable
+corepack prepare pnpm@latest --activate
+# To build without TensorFlow, append --no-optional
+pnpm i # --no-optional
+```
+
+### pm2
+
+To install pm2 run:
+
+```
+npm i -g pm2
+pm2 install pm2-logrotate
+```
+
+> **Note**
+> [`pm2-logrotate`](https://github.com/keymetrics/pm2-logrotate/blob/master/README.md) ensures that log files don't infinitely gather size, as Firefish produces a lot of logs.
+
+## 🐘 Create database
+
+In PostgreSQL (`psql`), run the following command:
+
+```sql
+CREATE DATABASE firefish WITH encoding = 'UTF8';
+```
+
+or run the following from the command line:
+
+```sh
+psql postgres -c "create database firefish with encoding = 'UTF8';"
+```
+
+In Firefish's directory, fill out the `db` section of `.config/default.yml` with the correct information, where the `db` key is `firefish`.
+
+## 💰 Caching server
+
+If you experience a lot of traffic, it's a good idea to set up another Redis-compatible caching server. If you don't set one one up, it'll fall back to the mandatory Redis server. DragonflyDB is the recommended option due to its unrivaled performance and ease of use.
+
+## 🔎 Set up search
+
+### 🦔 Sonic
+
+Sonic is better suited for self hosters with smaller deployments. It uses almost no resources, barely any any disk space, and is relatively fast.
+
+Follow sonic's [installation guide](https://github.com/valeriansaliou/sonic#installation)
+
+> **Note**
+> If you use IPv4: in Sonic's directory, edit the `config.cfg` file to change `inet` to `"0.0.0.0:1491"`.
+
+In Firefish's directory, fill out the `sonic` section of `.config/default.yml` with the correct information.
+
+### Meilisearch
+
+Meilisearch is better suited for larger deployments. It's faster but uses far more resources and disk space.
+
+Follow Meilisearch's [quick start guide](https://www.meilisearch.com/docs/learn/getting_started/quick_start)
+
+In Firefish's directory, fill out the `meilisearch` section of `.config/default.yml` with the correct information.
+
+### ElasticSearch
+
+Please don't use ElasticSearch unless you already have an ElasticSearch setup and want to continue using it for Firefish. ElasticSearch is slow, heavy, and offers very few benefits over Sonic/Meilisearch.
+
+## 💅 Customize
+
+- To add custom CSS for all users, edit `./custom/assets/instance.css`.
+- To add static assets (such as images for the splash screen), place them in the `./custom/assets/` directory. They'll then be available on `https://yourserver.tld/static-assets/filename.ext`.
+- To add custom locales, place them in the `./custom/locales/` directory. If you name your custom locale the same as an existing locale, it will overwrite it. If you give it a unique name, it will be added to the list. Also make sure that the first part of the filename matches the locale you're basing it on. (Example: `en-FOO.yml`)
+- To add custom error images, place them in the `./custom/assets/badges` directory, replacing the files already there.
+- To add custom sounds, place only mp3 files in the `./custom/assets/sounds` directory.
+- To update custom assets without rebuilding, just run `pnpm run gulp`.
+- To block ChatGPT, CommonCrawl, or other crawlers from indexing your instance, uncomment the respective rules in `./custom/robots.txt`.
+
+## 🧑‍🔬 Configuring a new server
+
+- Run `cp .config/example.yml .config/default.yml`
+- Edit `.config/default.yml`, making sure to fill out required fields.
+- Also copy and edit `.config/docker_example.env` to `.config/docker.env` if you're using Docker.
+
+## 🚚 Migrating from Misskey/FoundKey to Firefish
+
+For migrating from Misskey v13, Misskey v12, and FoundKey, read [this document](https://git.joinfirefish.org/firefish/firefish/-/blob/develop/docs/migrate.md).
+
+## 🌐 Web proxy
+
+### 🍀 Nginx (recommended)
+
+- Run `sudo cp ./firefish.nginx.conf /etc/nginx/sites-available/ && cd /etc/nginx/sites-available/`
+- Edit `firefish.nginx.conf` to reflect your server properly
+- Run `sudo ln -s ./firefish.nginx.conf ../sites-enabled/firefish.nginx.conf`
+- Run `sudo nginx -t` to validate that the config is valid, then restart the NGINX service.
+
+### 🦦 Caddy
+
+- Add the following block to your `Caddyfile`, replacing `example.tld` with your own domain:
+```caddy
+example.tld {
+    reverse_proxy http://127.0.0.1:3000
+}
+```
+- Reload your caddy configuration
+
+### 🪶 Apache
+
+> **Warning**
+> Apache has some known problems with Firefish. Only use it if you have to.
+
+- Run `sudo cp ./firefish.apache.conf /etc/apache2/sites-available/ && cd /etc/apache2/sites-available/`
+- Edit `firefish.apache.conf` to reflect your server properly
+- Run `sudo a2ensite firefish.apache` to enable the site
+- Run `sudo service apache2 restart` to reload apache2 configuration
+## 🚀 Build and launch!
+
+### 🐢 NodeJS + pm2
+
+#### `git pull` and run these steps to update Firefish in the future!
+
+```sh
+# git pull
+pnpm install
+NODE_ENV=production pnpm run build && pnpm run migrate
+pm2 start "NODE_ENV=production pnpm run start" --name Firefish
+```
+
+## 😉 Tips & Tricks
+
+- When editing the config file, please don't fill out the settings at the bottom. They're designed *only* for managed hosting, not self hosting. Those settings are much better off being set in Firefish's control panel.
+- Port 3000 (used in the default config) might be already used on your server for something else. To find an open port for Firefish, run `for p in {3000..4000}; do ss -tlnH | tr -s ' ' | cut -d" " -sf4 | grep -q "${p}$" || echo "${p}"; done | head -n 1`. Replace 3000 with the minimum port and 4000 with the maximum port if you need it.
+- I'd recommend you use a S3 Bucket/CDN for Object Storage, especially if you use Docker.
+- When using object storage, setting a proper `Access-Control-Allow-Origin` response header is highly recommended.
+- I'd ***strongly*** recommend against using CloudFlare, but if you do, make sure to turn code minification off.
+- For push notifications, run `npx web-push generate-vapid-keys`, then put the public and private keys into Control Panel > General > ServiceWorker.
+- For translations, make a [DeepL](https://deepl.com) account and generate an API key, then put it into Control Panel > General > DeepL Translation.
+- To add another admin account:
+  - Go to the user's page > 3 Dots > About > Moderation > turn on "Moderator"
+  - Go back to Overview > click the clipboard icon next to the ID
+  - Run `psql -d firefish` (or whatever the database name is)
+  - Run `UPDATE "user" SET "isAdmin" = true WHERE id='999999';` (replace `999999` with the copied ID)
+  - Restart your Firefish server

RELEASE_NOTES.md

@@ -0,0 +1,120 @@
+# Firefish
+
+Welcome to the new era of FIREFISH!
+
+<img src="https://git.joinfirefish.org/firefish/firefish/-/raw/develop/animated.svg" height="320px"/>
+
+# Changelog
+
+## Major changes from last release candidate
+
+- Firefish branding and [new repo](https://git.joinfirefish.org/firefish/firefish)!
+- Far better Mastodon API support
+- Edits are now non-experimental
+- Support for secondary cache server
+- Link verification with `rel=me`
+- Store antennas in cache
+- Post imports with media
+- Sytle fixes
+- More translations
+- Performance upgrades
+- Bug fixes
+- Faster build
+- [FoundKey](https://genau.qwertqwefsday.eu/notes/9h0lqlg05m) -> Firefish migration fixes
+
+## Major changes from stable
+
+All of the above, plus:
+
+- Post editing
+- Post imports
+- New post design
+- New header design
+- Better accessibility
+- Server silences
+- Modmail
+- New MFM effects
+- Meilisearch search engine
+- Channel search
+- Improved system emails
+- cuid2 IDs
+- Emoji skin tones
+- New 2FA flow
+- Reduced visual clutter
+- Deck view improvements
+
+# Upgrading
+
+## If upgrading from v13 (old stable)
+
+**In addition to the rest of the steps after this**:
+
+- Install the Rust toolchain (v1.68.0 or higher): <https://www.rust-lang.org/tools/install>
+
+- (Optional) install Meilisearch to use as a search engine instead of Sonic: <https://www.meilisearch.com/>
+
+- Replace your config file (`.config/default.yml`) with a blank version of the example (`.config/example.yml`) and re-enter the information. This will make things easier.
+
+## Dependencies
+
+- Upgrade to at least Node v20.3.1 (v20.4.0 recommended).
+
+- (Optional, recommended) install DragonflyDB and configure under `cacheServer`: <https://www.dragonflydb.io/>
+
+## Set new repo and pull
+
+```sh
+git remote set-url origin https://git.joinfirefish.org/firefish/firefish.git
+git pull --ff
+```
+
+In case you get an error like:
+```
+error: The following untracked working tree files would be overwritten by merge:
+	packages/backend/assets/LICENSE
+Please move or remove them before you merge.
+Aborting
+```
+
+Run:
+```sh
+rm ./packages/backend/assets/LICENSE
+git reset --hard origin/develop
+git pull --ff
+```
+
+## Upgrade packages
+
+```sh
+corepack enable
+pnpm i
+```
+
+## Build
+
+```sh
+NODE_ENV=production pnpm run buld
+```
+
+## Migrate
+
+There are 3 new envoriment variables for this upgrade only, because antennas have been moved from the database to the cache.
+
+- `ANTENNA_MIGRATION_SKIP`: skips copying antennas to cache if `true`. Default is `false` (will clear all antennas if skipped).
+- `ANTENNA_MIGRATION_COPY_LIMIT`: limits how many entries are copied to cache. Default is `0` (no limit).
+- `ANTENNA_MIGRATION_READ_LIMIT`: limits how many entires are read from the database
+in each iteration of migration. Large value may result in faster migration, but also may consume more memory. Default is `10000`.
+
+With default options:
+
+```sh
+NODE_ENV=production pnpm run migrate
+```
+
+With custom options (feel free to only use some):
+
+```sh
+NODE_ENV=production ANTENNA_MIGRATION_SKIP=false ANTENNA_MIGRATION_COPY_LIMIT=0 ANTENNA_MIGRATION_READ_LIMIT=1000 pnpm run migrate
+```
+
+And then restart Calckey...uh... Firefish!

ROADMAP.md

@@ -1,42 +0,0 @@
-# Roadmap
-The order of individual tasks is a guide only and is subject to change depending on the situation.
-Also, the later tasks are more indefinite and are subject to change as development progresses.
-
-## (1) Improve maintainability \<current phase\>
-This is the phase we are at now. We need to make a high-maintenance environment that can withstand future development.
-
-- Make the number of type errors zero (backend)
-	- Probably need to switch some libraries to others that make it difficult to reduce type errors
-		- e.g. koa to fastify https://github.com/misskey-dev/misskey/issues/7537
-- Improve CI
-	- Fix tests
-		- mocha, jest, etc. do not support the combination of `TypeScript + ESM + Path alias`, and the tests currently do not work.
-	- Fix random test failures - https://github.com/misskey-dev/misskey/issues/7985 and https://github.com/misskey-dev/misskey/issues/7986
-	- Add more tests
-		- May need to implement a mechanism that allows for DI
-			- https://github.com/misskey-dev/misskey/pull/9085
-	- Measure coverage
-		- https://github.com/misskey-dev/misskey/pull/9081
-- Improve documentation
-- Refactoring
-	- Extract the logic of each endpoint definition into a service and just call it
-
-## (2) Improve functionality
-Once Phase 1 is complete and an environment conducive to the development of a stable system is in place, the implementation of new functions can begin gradually.
-
-- Improve features for moderation
-- OAuth2 support https://github.com/misskey-dev/misskey/issues/8262
-- GraphQL support?
-
-## (3) Improve scalability
-Once the development of the feature has settled down, this may be an opportunity to make larger modifications.
-
-- Rewriting in Rust?
-
-## (4) Change the world
-It is time to promote Misskey and change the world.
-
-- Become more major than services such as Twitter and become critical infrastructure for the world
-- MiOS will be developed and integrated into various systems - What is MiOS?
-- Letting Ai-chan interfere with the real world
-- Make Misskey a member of GAFA; Misskey's office must be a reinforced concrete brutalist building with a courtyard.

SECURITY.md

@@ -1,9 +1,16 @@
 # Reporting Security Issues
 
-If you discover a security issue in Misskey, please report it by sending an
-email to [syuilotan@yahoo.co.jp](mailto:syuilotan@yahoo.co.jp).
+## Minor Security Issues
+
+If you discover a minor security issue in Firefish, please report it by sending an
+email to [kainoa@t1c.dev](mailto:kainoa@t1c.dev).
+
+## High Security Issues
+
+If you discover a security issue, which is so high risk, that too much is affected by it, please dont send it over unencrypted communication. You can share your PGP keys with us using kainoa@t1c.dev and after we established a secure communication, send it over E-Mail, or message us using matrix' encrypted private messages at @t1c:matrix.fedibird.com or @cleo:tchncs.de
+
 
 This will allow us to assess the risk, and make a fix available before we add a
-bug report to the GitHub repository.
+bug report to the Codeberg repository.
 
-Thanks for helping make Misskey safe for everyone.
+Thanks for helping make Firefish safe for everyone.

animated.svg

@@ -0,0 +1,153 @@
+<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" viewBox="0 0 1792 1792">
+
+  <style>
+    /* Eyes */
+    @keyframes firefish-logo-blink {
+      95% {
+        transform: scaleY(1);
+      }
+
+      97.5% {
+        transform: scaleY(0);
+      }
+
+      100% {
+        transform: scaleY(1);
+      }
+    }
+
+    #firefish-logo-eye-l,
+    #firefish-logo-eye-r {
+      transform-origin: center;
+      transform-box: fill-box;
+      animation-name: firefish-logo-blink;
+      animation-duration: 3s;
+      animation-iteration-count: infinite;
+      animation-timing-function: ease-in-out;
+    }
+
+    /* Bubbles */
+    @keyframes firefish-logo-bloop {
+      0% {
+        transform: translateY(400px);
+        opacity: 0;
+      }
+
+      20% {
+        opacity: 0;
+      }
+
+      30% {
+        opacity: 1;
+      }
+
+      80% {
+        opacity: 1;
+      }
+
+      90% {
+        opacity: 0;
+      }
+
+      100% {
+        transform: translateY(-400px);
+      }
+    }
+
+    .firefish-logo-bubble {
+      animation-name: firefish-logo-bloop;
+      animation-fill-mode: forwards;
+      animation-iteration-count: infinite;
+      animation-duration: 2s;
+      animation-timing-function: ease-out;
+      fill: #31748f;
+      opacity: 0;
+    }
+
+    #firefish-logo-bubble-1 {
+      animation-delay: 0s;
+    }
+
+    #firefish-logo-bubble-2 {
+      animation-delay: .2s;
+    }
+
+    #firefish-logo-bubble-3 {
+      animation-delay: .6s;
+    }
+
+    #firefish-logo-bubble-4 {
+      animation-delay: .8s;
+    }
+
+    #firefish-logo-bubble-5 {
+      animation-delay: 1s;
+    }
+  </style>
+
+  <defs>
+    <linearGradient id="firefish-logo-linear-gradient" x1="26.41" y1="1765.71" x2="1492.49" y2="299.62"
+      gradientUnits="userSpaceOnUse">
+      <stop offset="0" stop-color="#ec476d" />
+      <stop offset="1" stop-color="#f6ae4a" />
+    </linearGradient>
+    <linearGradient id="firefish-logo-linear-gradient-purple" x1="512" y1="1788" x2="512" y2="1398.68"
+      gradientUnits="userSpaceOnUse">
+      <stop offset="0" stop-color="#db44db" stop-opacity=".3" />
+      <stop offset=".11" stop-color="#db44db" stop-opacity=".21" />
+      <stop offset=".27" stop-color="#db44db" stop-opacity=".12" />
+      <stop offset=".44" stop-color="#db44db" stop-opacity=".05" />
+      <stop offset=".65" stop-color="#db44db" stop-opacity=".01" />
+      <stop offset="1" stop-color="#db44db" stop-opacity="0" />
+    </linearGradient>
+    <linearGradient id="firefish-logo-linear-gradient-3" x1="-351.25" y1="1382.82" x2="1150.74" y2="-119.17"
+      xlink:href="#firefish-logo-linear-gradient" />
+    <linearGradient id="firefish-logo-linear-gradient-4" x1="412.3" y1="2147.8" x2="1915.31" y2="644.8"
+      xlink:href="#firefish-logo-linear-gradient" />
+    <linearGradient id="firefish-logo-linear-gradient-5" x1="28.25" y1="1763.75" x2="1531.25" y2="260.75"
+      xlink:href="#firefish-logo-linear-gradient" />
+  </defs>
+
+  <!-- Bubbles -->
+  <circle id="firefish-logo-bubble-1" class="firefish-logo-bubble" cx="205" cy="500" r="40" />
+  <circle id="firefish-logo-bubble-2" class="firefish-logo-bubble" cx="140" cy="500" r="80" />
+  <circle id="firefish-logo-bubble-3" class="firefish-logo-bubble" cx="95" cy="500" r="70" />
+  <circle id="firefish-logo-bubble-4" class="firefish-logo-bubble" cx="200" cy="500" r="40" />
+  <circle id="firefish-logo-bubble-5" class="firefish-logo-bubble" cx="95" cy="500" r="20" />
+
+  <g id="firefish-logo-firefish">
+    <g id="firefish-logo-fish">
+      <g id="firefish-logo-body">
+        <path
+          d="m928,768.11H96c-53.02,0-96,42.98-96,96v832c0,53.02,42.98,96,96,96h832c53.02,0,96-42.98,96-96v-832c0-53.02-42.98-96-96-96Z"
+          fill="url(#firefish-logo-linear-gradient)" />
+      </g>
+      <g id="firefish-logo-body-purple-grad">
+        <path
+          d="m928,768.11H96C42.98,768.11,0,811.09,0,864.11v832c0,53.02,42.98,96,96,96h832c53.02,0,96-42.98,96-96v-832c0-53.02-42.98-96-96-96Z"
+          fill="url(#firefish-logo-linear-gradient-purple)" />
+      </g>
+      <g id="firefish-logo-fin-l">
+        <path
+          d="m927.66,639.79h-439.94c-52.98,0-95.94-42.95-95.94-95.94V103.91c0-85.47,103.34-128.27,163.77-67.84l439.94,439.94c60.44,60.44,17.63,163.77-67.84,163.77Z"
+          fill="url(#firefish-logo-linear-gradient-3)" />
+      </g>
+      <g id="firefish-logo-fin-b">
+        <path
+          d="m1694.66,1408.11h-445.51c-53.65,0-97.15-43.5-97.15-97.15v-445.51c0-86.55,104.64-129.9,165.84-68.7l445.51,445.51c61.2,61.2,17.86,165.84-68.7,165.84Z"
+          fill="url(#firefish-logo-linear-gradient-4)" />
+      </g>
+      <g id="firefish-logo-fin-r">
+        <path
+          d="m1694.66,640h-445.51c-53.65,0-97.15-43.5-97.15-97.15V97.34c0-86.55,104.64-129.9,165.84-68.7l445.51,445.51c61.2,61.2,17.86,165.84-68.7,165.84Z"
+          fill="url(#firefish-logo-linear-gradient-5)" />
+      </g>
+      <g id="firefish-logo-eye-l">
+        <circle cx="256" cy="1408.11" r="128" fill="#fff" />
+      </g>
+      <g id="firefish-logo-eye-r">
+        <circle cx="576" cy="1408.11" r="128" fill="#fff" />
+      </g>
+    </g>
+  </g>
+</svg>

assets/title_float.svg

@@ -1,67 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<svg
-   xmlns:dc="http://purl.org/dc/elements/1.1/"
-   xmlns:cc="http://creativecommons.org/ns#"
-   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
-   xmlns:svg="http://www.w3.org/2000/svg"
-   xmlns="http://www.w3.org/2000/svg"
-   id="svg10"
-   version="1.1"
-   viewBox="0 0 162.642 54.261"
-   height="205.08"
-   width="614.71">
-  <metadata
-     id="metadata16">
-    <rdf:RDF>
-      <cc:Work
-         rdf:about="">
-        <dc:format>image/svg+xml</dc:format>
-        <dc:type
-           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
-        <dc:title></dc:title>
-      </cc:Work>
-    </rdf:RDF>
-  </metadata>
-	<style>
-		#g8 { 
-    	animation-name: floating;
-    	animation-duration: 3s;
-    	animation-iteration-count: infinite;
-   	 	animation-timing-function: ease-in-out;
-		}
- 
-		@keyframes floating {
-    	0% { transform: translate(0,  0px); }
-    	50% { transform: translate(0, -5px); }
-    	100% { transform: translate(0, 0px); }
-		}
-	</style>
-	<linearGradient id="myGradient" gradientTransform="rotate(90)">
-      <stop offset="5%"  stop-color="#A1CA03" />
-      <stop offset="95%" stop-color="#91BA03" />
-    </linearGradient>
-  <defs
-     id="defs14" />
-  <g
-     id="g8"
-     fill="url('#myGradient')"
-     word-spacing="0"
-     letter-spacing="0"
-     font-family="OTADESIGN Rounded"
-     font-weight="400">
-    <g
-       id="g4"
-       style="line-height:476.69509888px;-inkscape-font-specification:'OTADESIGN Rounded'">
-      <path
-         id="path2"
-         font-size="141.034"
-         aria-label="Mi"
-         d="m 27.595,34.59 c -1.676,0.006 -3.115,-1.004 -3.793,-2.179 -0.363,-0.513 -1.08,-0.696 -1.09,0 v 3.214 c 0,1.291 -0.47,2.408 -1.412,3.35 -0.915,0.914 -2.031,1.371 -3.35,1.371 -1.29,0 -2.407,-0.457 -3.349,-1.372 -0.914,-0.941 -1.372,-2.058 -1.372,-3.349 V 17.95 c 0,-0.995 0.283,-1.896 0.848,-2.703 0.591,-0.834 1.345,-1.413 2.26,-1.735 0.516591,-0.189385 1.062793,-0.285215 1.613,-0.283 1.453,0 2.664,0.565 3.632,1.695 l 4.832,5.608 c 0.108,0.08 0.424,0.697 1.18,0.697 0.758,0 1.115,-0.617 1.222,-0.698 l 4.791,-5.607 c 0.996,-1.13 2.22,-1.695 3.673,-1.695 0.538,0 1.076,0.094 1.614,0.283 0.914,0.322 1.654,0.9 2.22,1.735 0.591,0.807 0.887,1.708 0.887,2.703 v 17.675 c 0,1.291 -0.47,2.408 -1.412,3.35 -0.915,0.914 -2.032,1.371 -3.35,1.371 -1.291,0 -2.407,-0.457 -3.35,-1.372 -0.914,-0.941 -1.371,-2.058 -1.371,-3.349 v -3.214 c -0.08,-0.877 -0.855,-0.324 -1.13,0 -0.726,1.345 -2.118,2.173 -3.793,2.18 z M 47.806,21.38 c -1.13,0 -2.098333,-0.39 -2.905,-1.17 -0.78,-0.806667 -1.17,-1.775 -1.17,-2.905 0,-1.13 0.39,-2.085 1.17,-2.865 0.806667,-0.806667 1.775,-1.21 2.905,-1.21 1.13,0 2.098667,0.403333 2.906,1.21 0.806667,0.78 1.21,1.735 1.21,2.865 0,1.13 -0.403333,2.098333 -1.21,2.905 -0.807333,0.78 -1.776,1.17 -2.906,1.17 z m 0.04,0.808 c 1.13,0 2.085333,0.403333 2.866,1.21 0.806667,0.806667 1.21,1.775333 1.21,2.906 v 9.967 c 0,1.13 -0.403333,2.098333 -1.21,2.905 -0.78,0.78 -1.735333,1.17 -2.866,1.17 -1.129333,0 -2.097667,-0.39 -2.905,-1.17 -0.806667,-0.806667 -1.21,-1.775 -1.21,-2.905 v -9.967 c 0,-1.13 0.403333,-2.098667 1.21,-2.906 0.806667,-0.806667 1.775,-1.21 2.905,-1.21 z"
-         style="font-size:141.03399658px;-inkscape-font-specification:'OTADESIGN Rounded'" />
-    </g>
-    <path
-       id="path6"
-       d="M60.925 27.24q.968.243 2.42.525 2.42.403 3.792 1.29 2.582 1.695 2.582 5.083 0 2.743-1.815 4.478-2.098 2.017-5.85 2.017-2.742 0-6.13-.767-1.09-.242-1.776-1.089-.645-.847-.645-1.896 0-1.29.887-2.178.928-.928 2.179-.928.363 0 .685.081 1.17.242 4.478.605.444 0 .968-.04.202 0 .202-.242.04-.202-.242-.283-1.372-.242-2.542-.524-1.33-.282-1.896-.484-1.129-.323-1.895-.847-2.582-1.694-2.622-5.083 0-2.702 1.855-4.477 2.26-2.179 6.414-1.977 2.783.121 5.567.726 1.048.242 1.734 1.09.686.846.686 1.936 0 1.25-.928 2.178-.887.887-2.178.887-.323 0-.645-.08-1.17-.242-4.518-.565-.404-.04-.767 0-.323.04-.323.242.04.242.323.323zm17.555 0q.968.243 2.42.525 2.42.403 3.792 1.29 2.581 1.695 2.581 5.083 0 2.743-1.815 4.478-2.098 2.017-5.849 2.017-2.743 0-6.131-.767-1.09-.242-1.775-1.089-.646-.847-.646-1.896 0-1.29.888-2.178.927-.928 2.178-.928.363 0 .686.081 1.17.242 4.477.605.444 0 .968-.04.202 0 .202-.242.04-.202-.242-.283-1.371-.242-2.541-.524-1.331-.282-1.896-.484-1.13-.323-1.896-.847-2.582-1.694-2.622-5.083 0-2.702 1.855-4.477 2.26-2.179 6.414-1.977 2.784.121 5.567.726 1.049.242 1.735 1.09.685.846.685 1.936 0 1.25-.927 2.178-.888.887-2.179.887-.322 0-.645-.08-1.17-.242-4.518-.565-.403-.04-.767 0-.322.04-.322.242.04.242.322.323zm26.075 3.335q.12.08 2.864 2.783 1.25 1.21 1.25 2.945 0 1.613-1.17 2.864-1.17 1.21-2.904 1.21-1.654 0-2.864-1.17l-4.034-3.913q-.161-.12-.323-.12-.322 0-.322 1.21 0 1.694-1.21 2.904-1.21 1.17-2.905 1.17-1.694 0-2.904-1.17-1.17-1.21-1.17-2.905V17.586q0-1.694 1.17-2.864 1.21-1.21 2.904-1.21t2.904 1.21q1.21 1.17 1.21 2.864v6.293q0 .403.283.524.242.121.524-.08.162-.081 4.841-3.188 1.049-.645 2.259-.645 2.219 0 3.429 1.815.645 1.05.645 2.26 0 2.218-1.815 3.428l-2.541 1.614v.04l-.081.04q-.565.363-.04.888zm15.599 10.058q-4.195 0-7.18-2.945-2.945-2.985-2.945-7.18 0-4.155 2.945-7.1 2.985-2.985 7.18-2.985 4.155 0 6.979 2.784.928.927.928 2.259 0 1.33-.928 2.259l-4.68 4.639q-1.008 1.008-2.016 1.008-1.453 0-2.26-.807-.806-.807-.806-2.138 0-1.29.928-2.218l.806-.847q.162-.121.081-.243-.12-.08-.323-.04-.806.202-1.371.807-1.13 1.09-1.13 2.622 0 1.573 1.09 2.703 1.13 1.089 2.702 1.089 1.533 0 2.622-1.13.928-.927 2.26-.927 1.33 0 2.258.927.928.928.928 2.26 0 1.33-.928 2.258-2.985 2.945-7.14 2.945zm29.259-15.786v5.607q0 .564-.08 1.21v7.382q0 4.518-2.744 7.22-2.702 2.703-7.301 2.703-2.662 0-4.8-1.008-2.138-.968-2.138-3.348 0-.807.363-1.533.968-2.179 3.348-2.179.565 0 1.573.323 1.009.323 1.654.323 1.694 0 2.219-.726.201-.283.08-.444-.161-.242-.564-.161-.686.12-1.493.12-4.074 0-6.979-2.904-2.904-2.904-2.904-6.978v-5.607q0-1.695 1.17-2.864 1.21-1.21 2.904-1.21t2.905 1.21q1.21 1.17 1.21 2.864v5.607q0 .685.484 1.21.524.484 1.21.484.726 0 1.21-.484.484-.525.484-1.21v-5.607q0-1.695 1.21-2.864 1.21-1.21 2.905-1.21 1.694 0 2.864 1.21 1.21 1.17 1.21 2.864z"
-       style="line-height:136.34428406px;-inkscape-font-specification:'OTADESIGN Rounded'" />
-  </g>
-</svg>

biome.json

@@ -0,0 +1,12 @@
+{
+	"$schema": "https://biomejs.dev/schemas/1.0.0/schema.json",
+	"organizeImports": {
+		"enabled": true
+	},
+	"linter": {
+		"enabled": true,
+		"rules": {
+			"recommended": true
+		}
+	}
+}

chart/.helmignore

@@ -0,0 +1,23 @@
+# Patterns to ignore when building packages.
+# This supports shell glob matching, relative path matching, and
+# negation (prefixed with !). Only one pattern per line.
+.DS_Store
+# Common VCS dirs
+.git/
+.gitignore
+.bzr/
+.bzrignore
+.hg/
+.hgignore
+.svn/
+# Common backup files
+*.swp
+*.bak
+*.tmp
+*.orig
+*~
+# Various IDEs
+.project
+.idea/
+*.tmproj
+.vscode/

chart/Chart.yaml

@@ -1,3 +1,38 @@
 apiVersion: v2
-name: misskey
-version: 0.0.0
+name: firefish
+description: A fun, new, open way to experience social media https://joinfirefish.org
+
+# A chart can be either an 'application' or a 'library' chart.
+#
+# Application charts are a collection of templates that can be packaged into versioned archives
+# to be deployed.
+#
+# Library charts provide useful utilities or functions for the chart developer. They're included as
+# a dependency of application charts to inject those utilities and functions into the rendering
+# pipeline. Library charts do not define any templates and therefore cannot be deployed.
+type: application
+
+# This is the chart version. This version number should be incremented each time you make changes
+# to the chart and its templates, including the app version.
+# Versions are expected to follow Semantic Versioning (https://semver.org/)
+version: 0.1.2
+
+# This is the version number of the application being deployed. This version number should be
+# incremented each time you make changes to the application. Versions are not expected to
+# follow Semantic Versioning. They should reflect the version the application is using.
+# It is recommended to use it with quotes.
+appVersion: 'v1.0.4-beta31'
+
+dependencies:
+  - name: elasticsearch
+    version: 19.0.1
+    repository: https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami
+    condition: elasticsearch.enabled
+  - name: postgresql
+    version: 11.1.3
+    repository: https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami
+    condition: postgresql.enabled
+  - name: redis
+    version: 16.13.2
+    repository: https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami
+    condition: redis.enabled

chart/README.md

@@ -0,0 +1,89 @@
+# firefish
+
+![Version: 0.1.2](https://img.shields.io/badge/Version-0.1.2-informational?style=flat-square) ![Type: application](https://img.shields.io/badge/Type-application-informational?style=flat-square) ![AppVersion: rc](https://img.shields.io/badge/AppVersion-rc-informational?style=flat-square)
+
+A fun, new, open way to experience social media https://joinfirefish.org
+
+## Requirements
+
+| Repository | Name | Version |
+|------------|------|---------|
+| https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami | elasticsearch | 19.0.1 |
+| https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami | postgresql | 11.1.3 |
+| https://raw.githubusercontent.com/bitnami/charts/archive-full-index/bitnami | redis | 16.13.2 |
+
+## Values
+
+| Key | Type | Default | Description |
+|-----|------|---------|-------------|
+| affinity | object | `{}` |  |
+| autoscaling.enabled | bool | `false` |  |
+| autoscaling.maxReplicas | int | `100` |  |
+| autoscaling.minReplicas | int | `1` |  |
+| autoscaling.targetCPUUtilizationPercentage | int | `80` |  |
+| firefish.allowedPrivateNetworks | list | `[]` | If you want to allow firefish to connect to private ips, enter the cidrs here. |
+| firefish.deepl.authKey | string | `""` |  |
+| firefish.deepl.isPro | bool | `false` |  |
+| firefish.deepl.managed | bool | `false` |  |
+| firefish.domain | string | `"firefish.local"` |  |
+| firefish.isManagedHosting | bool | `true` |  |
+| firefish.libreTranslate.apiKey | string | `""` |  |
+| firefish.libreTranslate.apiUrl | string | `""` |  |
+| firefish.libreTranslate.managed | bool | `false` |  |
+| firefish.objectStorage.access_key | string | `""` |  |
+| firefish.objectStorage.access_secret | string | `""` |  |
+| firefish.objectStorage.baseUrl | string | `""` |  |
+| firefish.objectStorage.bucket | string | `""` |  |
+| firefish.objectStorage.endpoint | string | `""` |  |
+| firefish.objectStorage.managed | bool | `true` |  |
+| firefish.objectStorage.prefix | string | `"files"` |  |
+| firefish.objectStorage.region | string | `""` |  |
+| firefish.reservedUsernames[0] | string | `"root"` |  |
+| firefish.reservedUsernames[1] | string | `"admin"` |  |
+| firefish.reservedUsernames[2] | string | `"administrator"` |  |
+| firefish.reservedUsernames[3] | string | `"me"` |  |
+| firefish.reservedUsernames[4] | string | `"system"` |  |
+| firefish.smtp.from_address | string | `"notifications@example.com"` |  |
+| firefish.smtp.login | string | `""` |  |
+| firefish.smtp.managed | bool | `true` |  |
+| firefish.smtp.password | string | `""` |  |
+| firefish.smtp.port | int | `587` |  |
+| firefish.smtp.server | string | `"smtp.mailgun.org"` |  |
+| firefish.smtp.useImplicitSslTls | bool | `false` |  |
+| elasticsearch | object | `{"auth":{},"enabled":false,"hostname":"","port":9200,"ssl":false}` | https://github.com/bitnami/charts/tree/master/bitnami/elasticsearch#parameters |
+| fullnameOverride | string | `""` |  |
+| image.pullPolicy | string | `"IfNotPresent"` |  |
+| image.repository | string | `"registry.joinfirefish.org/firefish/firefish"` |  |
+| image.tag | string | `""` |  |
+| imagePullSecrets | list | `[]` |  |
+| ingress.annotations | object | `{}` |  |
+| ingress.className | string | `""` |  |
+| ingress.enabled | bool | `false` |  |
+| ingress.hosts[0].host | string | `"chart-example.local"` |  |
+| ingress.hosts[0].paths[0].path | string | `"/"` |  |
+| ingress.hosts[0].paths[0].pathType | string | `"ImplementationSpecific"` |  |
+| ingress.tls | list | `[]` |  |
+| nameOverride | string | `""` |  |
+| nodeSelector | object | `{}` |  |
+| podAnnotations | object | `{}` |  |
+| podSecurityContext | object | `{}` |  |
+| postgresql.auth.database | string | `"firefish_production"` |  |
+| postgresql.auth.password | string | `""` |  |
+| postgresql.auth.username | string | `"firefish"` |  |
+| postgresql.enabled | bool | `true` | disable if you want to use an existing db; in which case the values below must match those of that external postgres instance |
+| redis.auth.password | string | `""` | you must set a password; the password generated by the redis chart will be rotated on each upgrade: |
+| redis.enabled | bool | `true` |  |
+| redis.hostname | string | `""` |  |
+| redis.port | int | `6379` |  |
+| replicaCount | int | `1` |  |
+| resources | object | `{}` |  |
+| securityContext | object | `{}` |  |
+| service.port | int | `80` |  |
+| service.type | string | `"ClusterIP"` |  |
+| serviceAccount.annotations | object | `{}` |  |
+| serviceAccount.create | bool | `true` |  |
+| serviceAccount.name | string | `""` |  |
+| tolerations | list | `[]` |  |
+
+----------------------------------------------
+Autogenerated from chart metadata using [helm-docs v1.11.0](https://github.com/norwoodj/helm-docs/releases/v1.11.0)

chart/templates/ConfigMap.yml

@@ -1,8 +0,0 @@
-apiVersion: v1
-kind: ConfigMap
-metadata:
-  name: {{ include "misskey.fullname" . }}-configuration
-data:
-  default.yml: |-
-    {{ .Files.Get "files/default.yml"|nindent 4 }}
-    url: {{ .Values.url }}

chart/templates/Deployment.yml

@@ -1,47 +0,0 @@
-apiVersion: apps/v1
-kind: Deployment
-metadata:
-  name: {{ include "misskey.fullname" . }}
-  labels:
-		{{- include "misskey.labels" . | nindent 4 }}
-spec:
-  selector:
-    matchLabels:
-			{{- include "misskey.selectorLabels" . | nindent 6 }}
-  replicas: 1
-  template:
-    metadata:
-      labels:
-				{{- include "misskey.selectorLabels" . | nindent 8 }}
-    spec:
-      containers:
-        - name: misskey
-          image: {{ .Values.image }}
-          env:
-            - name: NODE_ENV
-              value: {{ .Values.environment }}
-          volumeMounts:
-            - name: {{ include "misskey.fullname" . }}-configuration
-              mountPath: /misskey/.config
-              readOnly: true
-          ports:
-            - containerPort: 3000
-        - name: postgres
-          image: postgres:14-alpine
-          env:
-            - name: POSTGRES_USER
-              value: "example-misskey-user"
-            - name: POSTGRES_PASSWORD
-              value: "example-misskey-pass"
-            - name: POSTGRES_DB
-              value: "misskey"
-          ports:
-            - containerPort: 5432
-        - name: redis
-          image: redis:alpine
-          ports:
-            - containerPort: 6379
-      volumes:
-        - name: {{ include "misskey.fullname" . }}-configuration
-          configMap:
-            name: {{ include "misskey.fullname" . }}-configuration

chart/templates/NOTES.txt

@@ -0,0 +1,22 @@
+1. Get the application URL by running these commands:
+{{- if .Values.ingress.enabled }}
+{{- range $host := .Values.ingress.hosts }}
+  {{- range .paths }}
+  http{{ if $.Values.ingress.tls }}s{{ end }}://{{ $host.host }}{{ .path }}
+  {{- end }}
+{{- end }}
+{{- else if contains "NodePort" .Values.service.type }}
+  export NODE_PORT=$(kubectl get --namespace {{ .Release.Namespace }} -o jsonpath="{.spec.ports[0].nodePort}" services {{ include "firefish.fullname" . }})
+  export NODE_IP=$(kubectl get nodes --namespace {{ .Release.Namespace }} -o jsonpath="{.items[0].status.addresses[0].address}")
+  echo http://$NODE_IP:$NODE_PORT
+{{- else if contains "LoadBalancer" .Values.service.type }}
+     NOTE: It may take a few minutes for the LoadBalancer IP to be available.
+           You can watch the status of by running 'kubectl get --namespace {{ .Release.Namespace }} svc -w {{ include "firefish.fullname" . }}'
+  export SERVICE_IP=$(kubectl get svc --namespace {{ .Release.Namespace }} {{ include "firefish.fullname" . }} --template "{{"{{ range (index .status.loadBalancer.ingress 0) }}{{.}}{{ end }}"}}")
+  echo http://$SERVICE_IP:{{ .Values.service.port }}
+{{- else if contains "ClusterIP" .Values.service.type }}
+  export POD_NAME=$(kubectl get pods --namespace {{ .Release.Namespace }} -l "app.kubernetes.io/name={{ include "firefish.name" . }},app.kubernetes.io/instance={{ .Release.Name }}" -o jsonpath="{.items[0].metadata.name}")
+  export CONTAINER_PORT=$(kubectl get pod --namespace {{ .Release.Namespace }} $POD_NAME -o jsonpath="{.spec.containers[0].ports[0].containerPort}")
+  echo "Visit http://127.0.0.1:8080 to use your application"
+  kubectl --namespace {{ .Release.Namespace }} port-forward $POD_NAME 8080:$CONTAINER_PORT
+{{- end }}

chart/templates/Service.yml

@@ -1,14 +0,0 @@
-apiVersion: v1
-kind: Service
-metadata:
-  name: {{ include "misskey.fullname" . }}
-  annotations:
-    dev.okteto.com/auto-ingress: "true"
-spec:
-  type: ClusterIP
-  ports:
-    - port: 3000
-      protocol: TCP
-      name: http
-  selector:
-		{{- include "misskey.selectorLabels" . | nindent 4 }}

chart/templates/_helpers.tpl

@@ -1,7 +1,7 @@
 {{/*
 Expand the name of the chart.
 */}}
-{{- define "misskey.name" -}}
+{{- define "firefish.name" -}}
 {{- default .Chart.Name .Values.nameOverride | trunc 63 | trimSuffix "-" }}
 {{- end }}
 
@@ -10,7 +10,7 @@ Create a default fully qualified app name.
 We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
 If release name contains chart name it will be used as a full name.
 */}}
-{{- define "misskey.fullname" -}}
+{{- define "firefish.fullname" -}}
 {{- if .Values.fullnameOverride }}
 {{- .Values.fullnameOverride | trunc 63 | trimSuffix "-" }}
 {{- else }}
@@ -26,16 +26,16 @@ If release name contains chart name it will be used as a full name.
 {{/*
 Create chart name and version as used by the chart label.
 */}}
-{{- define "misskey.chart" -}}
+{{- define "firefish.chart" -}}
 {{- printf "%s-%s" .Chart.Name .Chart.Version | replace "+" "_" | trunc 63 | trimSuffix "-" }}
 {{- end }}
 
 {{/*
 Common labels
 */}}
-{{- define "misskey.labels" -}}
-helm.sh/chart: {{ include "misskey.chart" . }}
-{{ include "misskey.selectorLabels" . }}
+{{- define "firefish.labels" -}}
+helm.sh/chart: {{ include "firefish.chart" . }}
+{{ include "firefish.selectorLabels" . }}
 {{- if .Chart.AppVersion }}
 app.kubernetes.io/version: {{ .Chart.AppVersion | quote }}
 {{- end }}
@@ -45,18 +45,285 @@ app.kubernetes.io/managed-by: {{ .Release.Service }}
 {{/*
 Selector labels
 */}}
-{{- define "misskey.selectorLabels" -}}
-app.kubernetes.io/name: {{ include "misskey.name" . }}
+{{- define "firefish.selectorLabels" -}}
+app.kubernetes.io/name: {{ include "firefish.name" . }}
 app.kubernetes.io/instance: {{ .Release.Name }}
 {{- end }}
 
 {{/*
 Create the name of the service account to use
 */}}
-{{- define "misskey.serviceAccountName" -}}
+{{- define "firefish.serviceAccountName" -}}
 {{- if .Values.serviceAccount.create }}
-{{- default (include "misskey.fullname" .) .Values.serviceAccount.name }}
+{{- default (include "firefish.fullname" .) .Values.serviceAccount.name }}
 {{- else }}
 {{- default "default" .Values.serviceAccount.name }}
 {{- end }}
 {{- end }}
+
+{{/*
+Create a default fully qualified name for dependent services.
+We truncate at 63 chars because some Kubernetes name fields are limited to this (by the DNS naming spec).
+*/}}
+{{- define "firefish.elasticsearch.fullname" -}}
+{{- printf "%s-%s" .Release.Name "elasticsearch" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "firefish.redis.fullname" -}}
+{{- printf "%s-%s" .Release.Name "redis" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{- define "firefish.postgresql.fullname" -}}
+{{- printf "%s-%s" .Release.Name "postgresql" | trunc 63 | trimSuffix "-" -}}
+{{- end -}}
+
+{{/*
+config/default.yml content
+*/}}
+{{- define "firefish.configDir.default.yml" -}}
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+# Firefish configuration
+#━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
+
+#   ┌─────┐
+#───┘ URL └─────────────────────────────────────────────────────
+
+# Final accessible URL seen by a user.
+url: "https://{{ .Values.firefish.domain }}/"
+
+# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
+# URL SETTINGS AFTER THAT!
+
+#   ┌───────────────────────┐
+#───┘ Port and TLS settings └───────────────────────────────────
+
+#
+# Misskey requires a reverse proxy to support HTTPS connections.
+#
+#                 +----- https://example.tld/ ------------+
+#   +------+      |+-------------+      +----------------+|
+#   | User | ---> || Proxy (443) | ---> | Misskey (3000) ||
+#   +------+      |+-------------+      +----------------+|
+#                 +---------------------------------------+
+#
+#   You need to set up a reverse proxy. (e.g. nginx)
+#   An encrypted connection with HTTPS is highly recommended
+#   because tokens may be transferred in GET requests.
+
+# The port that your Misskey server should listen on.
+port: 3000
+
+#   ┌──────────────────────────┐
+#───┘ PostgreSQL configuration └────────────────────────────────
+
+db:
+  {{- if .Values.postgresql.enabled }}
+  host: {{ template "firefish.postgresql.fullname" . }}
+  port: 5432
+  {{- else }}
+  host: {{ .Values.postgresql.postgresqlHostname }}
+  port: {{ .Values.postgresql.postgresqlPort | default "5432" | quote }}
+  {{- end }}
+
+  # Database name
+  db: {{ .Values.postgresql.auth.database }}
+
+  # Auth
+  user: {{ .Values.postgresql.auth.username }}
+  pass: "{{ .Values.postgresql.auth.password }}"
+
+  # Whether disable Caching queries
+  #disableCache: true
+
+  # Extra Connection options
+  #extra:
+  #  ssl:
+  #   host: localhost
+  #   rejectUnauthorized: false
+
+#   ┌─────────────────────┐
+#───┘ Redis configuration └─────────────────────────────────────
+
+redis:
+  {{- if .Values.redis.enabled }}
+  host: {{ template "firefish.redis.fullname" . }}-master
+  {{- else }}
+  host: {{ required "When the redis chart is disabled .Values.redis.hostname is required" .Values.redis.hostname }}
+  {{- end }}
+  port: {{ .Values.redis.port | default 6379 }}
+  #family: 0  # 0=Both, 4=IPv4, 6=IPv6
+  pass: {{ .Values.redis.auth.password | quote }}
+  #prefix: example-prefix
+  #db: 1
+  #user: default
+  #tls:
+  #  host: localhost
+  #  rejectUnauthorized: false
+
+#   ┌─────────────────────┐
+#───┘ Sonic configuration └─────────────────────────────────────
+
+#sonic:
+#  host: localhost
+#  port: 1491
+#  auth: SecretPassword
+#  collection: notes
+#  bucket: default
+
+#   ┌─────────────────────────────┐
+#───┘ Elasticsearch configuration └─────────────────────────────
+
+{{- if .Values.elasticsearch.enabled }}
+elasticsearch:
+  host: {{ template "mastodon.elasticsearch.fullname" . }}-master-hl
+  port: 9200
+  ssl: false
+{{- else if .Values.elasticsearch.hostname }}
+elasticsearch:
+  host: {{ .Values.elasticsearch.hostname | quote }}
+  port: {{ .Values.elasticsearch.port }}
+  ssl: {{ .Values.elasticsearch.ssl }}
+  {{- if .Values.elasticsearch.auth }}
+  user: {{ .Values.elasticsearch.auth.username | quote }}
+  pass: {{ .Values.elasticsearch.auth.password | quote }}
+  {{- end }}
+{{- end }}
+
+#   ┌───────────────┐
+#───┘ ID generation └───────────────────────────────────────────
+
+# You can select the ID generation method.
+# You don't usually need to change this setting, but you can
+# change it according to your preferences.
+
+# Available methods:
+# aid ... Short, Millisecond accuracy
+# meid ... Similar to ObjectID, Millisecond accuracy
+# ulid ... Millisecond accuracy
+# objectid ... This is left for backward compatibility
+
+# ONCE YOU HAVE STARTED THE INSTANCE, DO NOT CHANGE THE
+# ID SETTINGS AFTER THAT!
+
+id: 'aid'
+
+#   ┌─────────────────────┐
+#───┘ Other configuration └─────────────────────────────────────
+
+# Max note length, should be < 8000.
+#maxNoteLength: 3000
+
+# Maximum lenght of an image caption or file comment (default 1500, max 8192)
+#maxCaptionLength: 1500
+
+# Reserved usernames that only the administrator can register with
+reservedUsernames:
+{{ .Values.firefish.reservedUsernames | toYaml }}
+
+# Whether disable HSTS
+#disableHsts: true
+
+# Number of worker processes
+#clusterLimit: 1
+
+# Job concurrency per worker
+# deliverJobConcurrency: 128
+# inboxJobConcurrency: 16
+
+# Job rate limiter
+# deliverJobPerSec: 128
+# inboxJobPerSec: 16
+
+# Job attempts
+# deliverJobMaxAttempts: 12
+# inboxJobMaxAttempts: 8
+
+# IP address family used for outgoing request (ipv4, ipv6 or dual)
+#outgoingAddressFamily: ipv4
+
+# Syslog option
+#syslog:
+#  host: localhost
+#  port: 514
+
+# Proxy for HTTP/HTTPS
+#proxy: http://127.0.0.1:3128
+
+#proxyBypassHosts: [
+#  'example.com',
+#  '192.0.2.8'
+#]
+
+# Proxy for SMTP/SMTPS
+#proxySmtp: http://127.0.0.1:3128   # use HTTP/1.1 CONNECT
+#proxySmtp: socks4://127.0.0.1:1080 # use SOCKS4
+#proxySmtp: socks5://127.0.0.1:1080 # use SOCKS5
+
+# Media Proxy
+#mediaProxy: https://example.com/proxy
+
+# Proxy remote files (default: false)
+#proxyRemoteFiles: true
+
+allowedPrivateNetworks:
+{{ .Values.firefish.allowedPrivateNetworks | toYaml }}
+
+# TWA
+#twa:
+#  nameSpace: android_app
+#  packageName: tld.domain.twa
+#  sha256CertFingerprints: ['AB:CD:EF']
+
+# Upload or download file size limits (bytes)
+#maxFileSize: 262144000
+
+# Managed hosting settings
+# !!!!!!!!!!
+# >>>>>> NORMAL SELF-HOSTERS, STAY AWAY! <<<<<<
+# >>>>>> YOU DON'T NEED THIS! <<<<<<
+# !!!!!!!!!!
+# Each category is optional, but if each item in each category is mandatory!
+# If you mess this up, that's on you, you've been warned...
+
+#maxUserSignups: 100
+isManagedHosting: {{ .Values.firefish.isManagedHosting }}
+deepl:
+  managed: {{ .Values.firefish.deepl.managed }}
+  authKey: {{ .Values.firefish.deepl.authKey | quote}}
+  isPro: {{ .Values.firefish.deepl.isPro }}
+
+libreTranslate:
+  managed: {{ .Values.firefish.libreTranslate.managed }}
+  apiUrl: {{ .Values.firefish.libreTranslate.apiUrl | quote }}
+  apiKey: {{ .Values.firefish.libreTranslate.apiKey | quote }}
+
+email:
+  managed: {{ .Values.firefish.smtp.managed }}
+  address: {{ .Values.firefish.smtp.from_address | quote }}
+  host: {{ .Values.firefish.smtp.server | quote }}
+  port: {{ .Values.firefish.smtp.port }}
+  user: {{ .Values.firefish.smtp.login | quote }}
+  pass: {{ .Values.firefish.smtp.password | quote }}
+  useImplicitSslTls: {{ .Values.firefish.smtp.useImplicitSslTls }}
+objectStorage:
+  managed: {{ .Values.firefish.objectStorage.managed }}
+  baseUrl: {{ .Values.firefish.objectStorage.baseUrl | quote }}
+  bucket: {{ .Values.firefish.objectStorage.bucket | quote }}
+  prefix: {{ .Values.firefish.objectStorage.prefix | quote }}
+  endpoint: {{ .Values.firefish.objectStorage.endpoint | quote }}
+  region: {{ .Values.firefish.objectStorage.region | quote }}
+  accessKey: {{ .Values.firefish.objectStorage.access_key | quote }}
+  secretKey: {{ .Values.firefish.objectStorage.access_secret | quote }}
+  useSsl: true
+  connnectOverProxy: false
+  setPublicReadOnUpload: true
+  s3ForcePathStyle: true
+
+# !!!!!!!!!!
+# >>>>>> AGAIN, NORMAL SELF-HOSTERS, STAY AWAY! <<<<<<
+# >>>>>> YOU DON'T NEED THIS, ABOVE SETTINGS ARE FOR MANAGED HOSTING ONLY! <<<<<<
+# !!!!!!!!!!
+
+# Seriously. Do NOT fill out the above settings if you're self-hosting.
+# They're much better off being set from the control panel.
+{{- end }}

chart/templates/deployment.yaml

@@ -0,0 +1,82 @@
+apiVersion: apps/v1
+kind: Deployment
+metadata:
+  name: {{ include "firefish.fullname" . }}
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+spec:
+  {{- if not .Values.autoscaling.enabled }}
+  replicas: {{ .Values.replicaCount }}
+  {{- end }}
+  selector:
+    matchLabels:
+      {{- include "firefish.selectorLabels" . | nindent 6 }}
+  template:
+    metadata:
+      annotations:
+        checksum/secret-config: {{ include ( print $.Template.BasePath "/secret-config.yaml" ) . | sha256sum | quote }}
+        {{- with .Values.podAnnotations }}
+        {{- toYaml . | nindent 8 }}
+        {{- end }}
+      labels:
+        {{- include "firefish.selectorLabels" . | nindent 8 }}
+    spec:
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      serviceAccountName: {{ include "firefish.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      volumes:
+        - name: config-volume
+          secret:
+            secretName: {{ template "firefish.fullname" . }}-config
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          command:
+            - pnpm
+            - run
+            - start
+          env:
+            - name: "NODE_ENV"
+              value: "production"
+          volumeMounts:
+            - name: config-volume
+              mountPath: /firefish/.config
+          ports:
+            - name: http
+              containerPort: 3000
+              protocol: TCP
+          startupProbe:
+            httpGet:
+              path: /
+              port: http
+            failureThreshold: 30
+            periodSeconds: 10
+          livenessProbe:
+            httpGet:
+              path: /
+              port: http
+          readinessProbe:
+            httpGet:
+              path: /
+              port: http
+          resources:
+            {{- toYaml .Values.resources | nindent 12 }}
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

chart/templates/hpa.yaml

@@ -0,0 +1,28 @@
+{{- if .Values.autoscaling.enabled }}
+apiVersion: autoscaling/v2beta1
+kind: HorizontalPodAutoscaler
+metadata:
+  name: {{ include "firefish.fullname" . }}
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+spec:
+  scaleTargetRef:
+    apiVersion: apps/v1
+    kind: Deployment
+    name: {{ include "firefish.fullname" . }}
+  minReplicas: {{ .Values.autoscaling.minReplicas }}
+  maxReplicas: {{ .Values.autoscaling.maxReplicas }}
+  metrics:
+    {{- if .Values.autoscaling.targetCPUUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: cpu
+        targetAverageUtilization: {{ .Values.autoscaling.targetCPUUtilizationPercentage }}
+    {{- end }}
+    {{- if .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    - type: Resource
+      resource:
+        name: memory
+        targetAverageUtilization: {{ .Values.autoscaling.targetMemoryUtilizationPercentage }}
+    {{- end }}
+{{- end }}

chart/templates/ingress.yaml

@@ -0,0 +1,61 @@
+{{- if .Values.ingress.enabled -}}
+{{- $fullName := include "firefish.fullname" . -}}
+{{- $svcPort := .Values.service.port -}}
+{{- if and .Values.ingress.className (not (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion)) }}
+  {{- if not (hasKey .Values.ingress.annotations "kubernetes.io/ingress.class") }}
+  {{- $_ := set .Values.ingress.annotations "kubernetes.io/ingress.class" .Values.ingress.className}}
+  {{- end }}
+{{- end }}
+{{- if semverCompare ">=1.19-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1
+{{- else if semverCompare ">=1.14-0" .Capabilities.KubeVersion.GitVersion -}}
+apiVersion: networking.k8s.io/v1beta1
+{{- else -}}
+apiVersion: extensions/v1beta1
+{{- end }}
+kind: Ingress
+metadata:
+  name: {{ $fullName }}
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+  {{- with .Values.ingress.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+spec:
+  {{- if and .Values.ingress.className (semverCompare ">=1.18-0" .Capabilities.KubeVersion.GitVersion) }}
+  ingressClassName: {{ .Values.ingress.className }}
+  {{- end }}
+  {{- if .Values.ingress.tls }}
+  tls:
+    {{- range .Values.ingress.tls }}
+    - hosts:
+        {{- range .hosts }}
+        - {{ . | quote }}
+        {{- end }}
+      secretName: {{ .secretName }}
+    {{- end }}
+  {{- end }}
+  rules:
+    {{- range .Values.ingress.hosts }}
+    - host: {{ .host | quote }}
+      http:
+        paths:
+          {{- range .paths }}
+          - path: {{ .path }}
+            {{- if and .pathType (semverCompare ">=1.18-0" $.Capabilities.KubeVersion.GitVersion) }}
+            pathType: {{ .pathType }}
+            {{- end }}
+            backend:
+              {{- if semverCompare ">=1.19-0" $.Capabilities.KubeVersion.GitVersion }}
+              service:
+                name: {{ $fullName }}
+                port:
+                  number: {{ $svcPort }}
+              {{- else }}
+              serviceName: {{ $fullName }}
+              servicePort: {{ $svcPort }}
+              {{- end }}
+          {{- end }}
+    {{- end }}
+{{- end }}

chart/templates/job-db-migrate.yaml

@@ -0,0 +1,59 @@
+apiVersion: batch/v1
+kind: Job
+metadata:
+  name: {{ include "firefish.fullname" . }}-db-migrate
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+  annotations:
+    "helm.sh/hook": post-install,pre-upgrade
+    "helm.sh/hook-delete-policy": before-hook-creation,hook-succeeded
+    "helm.sh/hook-weight": "-2"
+spec:
+  template:
+    metadata:
+      name: {{ include "firefish.fullname" . }}-db-migrate
+      {{- with .Values.podAnnotations }}
+      annotations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+    spec:
+      restartPolicy: Never
+      {{- with .Values.imagePullSecrets }}
+      imagePullSecrets:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      serviceAccountName: {{ include "firefish.serviceAccountName" . }}
+      securityContext:
+        {{- toYaml .Values.podSecurityContext | nindent 8 }}
+      volumes:
+        - name: config-volume
+          secret:
+            secretName: {{ template "firefish.fullname" . }}-config
+      containers:
+        - name: {{ .Chart.Name }}
+          securityContext:
+            {{- toYaml .Values.securityContext | nindent 12 }}
+          image: "{{ .Values.image.repository }}:{{ .Values.image.tag | default .Chart.AppVersion }}"
+          imagePullPolicy: {{ .Values.image.pullPolicy }}
+          command:
+            - pnpm
+            - run
+            - migrate
+          env:
+            - name: "NODE_ENV"
+              value: "production"
+          volumeMounts:
+            - name: config-volume
+              mountPath: /firefish/.config
+      {{- with .Values.nodeSelector }}
+      nodeSelector:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.affinity }}
+      affinity:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}
+      {{- with .Values.tolerations }}
+      tolerations:
+        {{- toYaml . | nindent 8 }}
+      {{- end }}

chart/templates/secret-config.yaml

@@ -0,0 +1,9 @@
+apiVersion: v1
+kind: Secret
+metadata:
+  name: {{ template "firefish.fullname" . }}-config
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+type: Opaque
+data:
+  default.yml: {{ include "firefish.configDir.default.yml" . | b64enc }}

chart/templates/service.yaml

@@ -0,0 +1,15 @@
+apiVersion: v1
+kind: Service
+metadata:
+  name: {{ include "firefish.fullname" . }}
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+spec:
+  type: {{ .Values.service.type }}
+  ports:
+    - port: {{ .Values.service.port }}
+      targetPort: http
+      protocol: TCP
+      name: http
+  selector:
+    {{- include "firefish.selectorLabels" . | nindent 4 }}

chart/templates/serviceaccount.yaml

@@ -0,0 +1,12 @@
+{{- if .Values.serviceAccount.create -}}
+apiVersion: v1
+kind: ServiceAccount
+metadata:
+  name: {{ include "firefish.serviceAccountName" . }}
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+  {{- with .Values.serviceAccount.annotations }}
+  annotations:
+    {{- toYaml . | nindent 4 }}
+  {{- end }}
+{{- end }}

chart/templates/tests/test-connection.yaml

@@ -0,0 +1,15 @@
+apiVersion: v1
+kind: Pod
+metadata:
+  name: "{{ include "firefish.fullname" . }}-test-connection"
+  labels:
+    {{- include "firefish.labels" . | nindent 4 }}
+  annotations:
+    "helm.sh/hook": test
+spec:
+  containers:
+    - name: wget
+      image: busybox
+      command: ['wget']
+      args: ['{{ include "firefish.fullname" . }}:{{ .Values.service.port }}']
+  restartPolicy: Never

chart/values.yaml

@@ -0,0 +1,168 @@
+# Default values for firefish.
+# This is a YAML-formatted file.
+# Declare variables to be passed into your templates.
+
+replicaCount: 1
+
+image:
+  repository: registry.joinfirefish.org/firefish/firefish
+  pullPolicy: IfNotPresent
+  # Overrides the image tag whose default is the chart appVersion.
+  tag: ""
+
+firefish:
+  isManagedHosting: true
+  domain: firefish.local
+
+  deepl:
+    managed: false
+    authKey: ""
+    isPro: false
+
+  libreTranslate:
+    managed: false
+    apiUrl: ""
+    apiKey: ""
+
+  smtp:
+    managed: true
+    from_address: notifications@example.com
+    port: 587
+    server: smtp.mailgun.org
+    useImplicitSslTls: false
+    login: ""
+    password: ""
+
+  objectStorage:
+    managed: true
+    access_key: ""
+    access_secret: ""
+    baseUrl: "" # e.g. "https://my-bucket.nyc3.cdn.digitaloceanspaces.com"
+    bucket: "" # e.g. "my-bucket"
+    prefix: files
+    endpoint: "" # e.g. "nyc3.digitaloceanspaces.com:443"
+    region: "" # e.g. "nyc3"
+
+  # -- If you want to allow firefish to connect to private ips, enter the cidrs here.
+  allowedPrivateNetworks: []
+  # - "10.0.0.0/8"
+
+  reservedUsernames:
+    - root
+    - admin
+    - administrator
+    - me
+    - system
+
+# https://github.com/bitnami/charts/tree/master/bitnami/postgresql#parameters
+postgresql:
+  # -- disable if you want to use an existing db; in which case the values below
+  # must match those of that external postgres instance
+  enabled: true
+  # postgresqlHostname: preexisting-postgresql
+  # postgresqlPort: 5432
+  auth:
+    database: firefish_production
+    username: firefish
+    # you must set a password; the password generated by the postgresql chart will
+    # be rotated on each upgrade:
+    # https://github.com/bitnami/charts/tree/master/bitnami/postgresql#upgrade
+    password: ""
+
+# https://github.com/bitnami/charts/tree/master/bitnami/redis#parameters
+redis:
+  # disable if you want to use an existing redis instance; in which case the
+  # values below must match those of that external redis instance
+  enabled: true
+  hostname: ""
+  port: 6379
+  auth:
+    # -- you must set a password; the password generated by the redis chart will be
+    # rotated on each upgrade:
+    password: ""
+
+# -- https://github.com/bitnami/charts/tree/master/bitnami/elasticsearch#parameters
+elasticsearch:
+  # disable if you want to use an existing redis instance; in which case the
+  # values below must match those of that external elasticsearch instance
+  enabled: false
+  hostname: ""
+  port: 9200
+  ssl: false
+  auth: {}
+    # username: ""
+    # password: ""
+  # @ignored
+  image:
+    tag: 7
+
+imagePullSecrets: []
+nameOverride: ""
+fullnameOverride: ""
+
+serviceAccount:
+  # Specifies whether a service account should be created
+  create: true
+  # Annotations to add to the service account
+  annotations: {}
+  # The name of the service account to use.
+  # If not set and create is true, a name is generated using the fullname template
+  name: ""
+
+podAnnotations: {}
+
+podSecurityContext: {}
+  # fsGroup: 2000
+
+securityContext: {}
+  # capabilities:
+  #   drop:
+  #   - ALL
+  # readOnlyRootFilesystem: true
+  # runAsNonRoot: true
+  # runAsUser: 1000
+
+service:
+  type: ClusterIP
+  port: 80
+
+ingress:
+  enabled: false
+  className: ""
+  annotations: {}
+    # kubernetes.io/ingress.class: nginx
+    # kubernetes.io/tls-acme: "true"
+  hosts:
+    - host: chart-example.local
+      paths:
+        - path: /
+          pathType: ImplementationSpecific
+  tls: []
+  #  - secretName: chart-example-tls
+  #    hosts:
+  #      - chart-example.local
+
+resources: {}
+  # We usually recommend not to specify default resources and to leave this as a conscious
+  # choice for the user. This also increases chances charts run on environments with little
+  # resources, such as Minikube. If you do want to specify resources, uncomment the following
+  # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
+  # limits:
+  #   cpu: 100m
+  #   memory: 128Mi
+  # requests:
+  #   cpu: 100m
+  #   memory: 128Mi
+
+autoscaling:
+  enabled: false
+  minReplicas: 1
+  maxReplicas: 100
+  targetCPUUtilizationPercentage: 80
+  # targetMemoryUtilizationPercentage: 80
+
+nodeSelector: {}
+
+tolerations: []
+
+affinity: {}

chart/values.yml

@@ -1,3 +0,0 @@
-url: https://example.tld/
-image: okteto.dev/misskey
-environment: production

cliff.toml

@@ -0,0 +1,98 @@
+# configuration file for git-cliff (0.1.0)
+
+[changelog]
+# changelog header
+header = """
+# Changelog\n
+"""
+# template for the changelog body
+# https://tera.netlify.app/docs/#introduction
+body = """
+{% if version %}\
+    ## [{{ version | trim_start_matches(pat="v") }}] - {{ timestamp | date(format="%Y-%m-%d") }}
+{% else %}\
+    ## [unreleased]
+{% endif %}\
+{% for group, commits in commits | group_by(attribute="group") %}
+    ### {{ group | upper_first }}
+    {% for commit in commits %}
+        - {% if commit.breaking %}[**breaking**] {% endif %}{{ commit.message | upper_first }}\
+    {% endfor %}
+{% endfor %}\n
+"""
+# remove the leading and trailing whitespace from the template
+trim = true
+# changelog footer
+footer = """
+<!-- generated by git-cliff -->
+"""
+
+[git]
+# parse the commits based on https://www.conventionalcommits.org
+conventional_commits = false
+# filter out the commits that are not conventional
+filter_unconventional = true
+# process each line of a commit as an individual commit
+split_commits = false
+# regex for parsing and grouping commits
+commit_parsers = [
+    { message = "^feat", group = "Features"},
+    { message = "^add", group = "Features"},
+    { message = "^fix", group = "Bug Fixes"},
+    { message = "^prevent", group = "Bug Fixes"},
+    { message = "^doc", group = "Documentation"},
+    { message = "^perf", group = "Performance"},
+    { message = "^🎨", group = "Refactor"},
+    { message = "^enhance", group = "Refactor"},
+    { message = "^⚡️", group = "Refactor"},
+    { message = "^🔥", group = "Features"},
+    { message = "^🐛", group = "Bug Fixes"},
+    { message = "^🚑️", group = "Bug Fixes"},
+    { message = "^block", group = "Bug Fixes"},
+    { message = "^✨", group = "Features"},
+    { message = "^📝", group = "Documentation"},
+    { message = "^🚀", group = "Features"},
+    { message = "^💄", group = "Styling"},
+    { message = "^✅", group = "Testing"},
+    { message = "^🔒️", group = "Security"},
+    { message = "^🚨", group = "Testing"},
+    { message = "^💚", group = "CI"},
+    { message = "^👷", group = "CI"},
+    { message = "^⬇️", group = "Miscellaneous Tasks"},
+    { message = "^⬆️", group = "Miscellaneous Tasks"},
+    { message = "^📌", group = "Miscellaneous Tasks"},
+    { message = "^➕", group = "Miscellaneous Tasks"},
+    { message = "^➖", group = "Miscellaneous Tasks"},
+    { message = "^♻️", group = "Refactor"},
+    { message = "^🔧", group = "CI"},
+    { message = "^🔨", group = "CI"},
+    { message = "^🌐", group = "Localization"},
+    { message = "^✏️", group = "Localization"},
+    { message = "^👽️", group = "Bug Fixes"},
+    { message = "^🍱", group = "Styling"},
+    { message = "^♿️", group = "Styling"},
+    { message = "^🩹", group = "Bug Fixes"},
+    { message = "^refactor", group = "Refactor"},
+    { message = "^style", group = "Styling"},
+    { message = "^test", group = "Testing"},
+    { message = "^chore\\(release\\): prepare for", skip = true},
+    { message = "^chore", group = "Miscellaneous Tasks"},
+    { message = "^update", group = "Miscellaneous Tasks"},
+    { body = ".*security", group = "Security"},
+]
+# protect breaking changes from being skipped due to matching a skipping commit_parser
+protect_breaking_commits = false
+# filter out the commits that are not matched by commit parsers
+filter_commits = false
+# glob pattern for matching git tags
+tag_pattern = "v[0-9]*"
+# regex for skipping tags
+skip_tags = "v0.1.0-beta.1"
+# regex for ignoring tags
+ignore_tags = ""
+# sort the tags chronologically
+date_order = false
+# sort the commits inside sections by oldest/newest order
+sort_commits = "oldest"
+# limit the number of commits included in the changelog.
+# limit_commits = 42

crowdin.yml

@@ -1,4 +0,0 @@
-files:
-  - source: /locales/ja-JP.yml
-    translation: /locales/%locale%.yml
-    update_option: update_as_unapproved

custom/assets/LICENSE

@@ -0,0 +1,13 @@
+Copyright 2023 Firefish
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

custom/assets/instance.css

@@ -0,0 +1,7 @@
+/*
+* !!! WARNING !!!
+* Editing this file may cause your instance to break for EVERYONE.
+* Please know what you're doing and test it out with regular user custom CSS.
+* With that said, GLHF!
+* This may eventuallly be replaced with a function in the admin panel.
+ */

custom/assets/robots.txt

@@ -0,0 +1,14 @@
+User-agent: *
+Allow: /
+
+# Uncomment the following to block CommonCrawl
+#
+# User-agent: CCBot
+# User-agent: CCBot/2.0
+# User-agent: CCBot/3.1
+# Disallow: /
+
+# Uncomment the following to block ChatGPT
+#
+# User-agent: GPTBot
+# Disallow: /

cypress.config.ts

@@ -1,12 +1,12 @@
-import { defineConfig } from 'cypress'
+import { defineConfig } from "cypress";
 
 export default defineConfig({
-  e2e: {
-    // We've imported your old cypress plugins here.
-    // You may want to clean this up later by importing these.
-    setupNodeEvents(on, config) {
-      return require('./cypress/plugins/index.js')(on, config)
-    },
-    baseUrl: 'http://localhost:61812',
-  },
-})
+	e2e: {
+		// We've imported your old cypress plugins here.
+		// You may want to clean this up later by importing these.
+		setupNodeEvents(on, config) {
+			return require("./cypress/plugins/index.js")(on, config);
+		},
+		baseUrl: "http://localhost:61812",
+	},
+});

cypress/e2e/basic.cy.js

@@ -1,4 +1,4 @@
-describe('Before setup instance', () => {
+describe("Before setup instance", () => {
 	beforeEach(() => {
 		cy.resetState();
 	});
@@ -9,31 +9,31 @@ describe('Before setup instance', () => {
 		cy.wait(1000);
 	});
 
-  it('successfully loads', () => {
-    cy.visit('/');
-  });
+	it("successfully loads", () => {
+		cy.visit("/");
+	});
 
-	it('setup instance', () => {
-    cy.visit('/');
+	it("setup instance", () => {
+		cy.visit("/");
 
-		cy.intercept('POST', '/api/admin/accounts/create').as('signup');
-	
-		cy.get('[data-cy-admin-username] input').type('admin');
-		cy.get('[data-cy-admin-password] input').type('admin1234');
-		cy.get('[data-cy-admin-ok]').click();
+		cy.intercept("POST", "/api/admin/accounts/create").as("signup");
+
+		cy.get("[data-cy-admin-username] input").type("admin");
+		cy.get("[data-cy-admin-password] input").type("admin1234");
+		cy.get("[data-cy-admin-ok]").click();
 
 		// なぜか動かない
 		//cy.wait('@signup').should('have.property', 'response.statusCode');
-		cy.wait('@signup');
-  });
+		cy.wait("@signup");
+	});
 });
 
-describe('After setup instance', () => {
+describe("After setup instance", () => {
 	beforeEach(() => {
 		cy.resetState();
 
 		// インスタンス初期セットアップ
-		cy.registerUser('admin', 'pass', true);
+		cy.registerUser("admin", "pass", true);
 	});
 
 	afterEach(() => {
@@ -42,34 +42,34 @@ describe('After setup instance', () => {
 		cy.wait(1000);
 	});
 
-  it('successfully loads', () => {
-    cy.visit('/');
-  });
+	it("successfully loads", () => {
+		cy.visit("/");
+	});
 
-	it('signup', () => {
-		cy.visit('/');
+	it("signup", () => {
+		cy.visit("/");
 
-		cy.intercept('POST', '/api/signup').as('signup');
+		cy.intercept("POST", "/api/signup").as("signup");
 
-		cy.get('[data-cy-signup]').click();
-		cy.get('[data-cy-signup-username] input').type('alice');
-		cy.get('[data-cy-signup-password] input').type('alice1234');
-		cy.get('[data-cy-signup-password-retype] input').type('alice1234');
-		cy.get('[data-cy-signup-submit]').click();
+		cy.get("[data-cy-signup]").click();
+		cy.get("[data-cy-signup-username] input").type("alice");
+		cy.get("[data-cy-signup-password] input").type("alice1234");
+		cy.get("[data-cy-signup-password-retype] input").type("alice1234");
+		cy.get("[data-cy-signup-submit]").click();
 
-		cy.wait('@signup');
-  });
+		cy.wait("@signup");
+	});
 });
 
-describe('After user signup', () => {
+describe("After user signup", () => {
 	beforeEach(() => {
 		cy.resetState();
 
 		// インスタンス初期セットアップ
-		cy.registerUser('admin', 'pass', true);
+		cy.registerUser("admin", "pass", true);
 
 		// ユーザー作成
-		cy.registerUser('alice', 'alice1234');
+		cy.registerUser("alice", "alice1234");
 	});
 
 	afterEach(() => {
@@ -78,51 +78,53 @@ describe('After user signup', () => {
 		cy.wait(1000);
 	});
 
-  it('successfully loads', () => {
-    cy.visit('/');
-  });
+	it("successfully loads", () => {
+		cy.visit("/");
+	});
 
-	it('signin', () => {
-		cy.visit('/');
+	it("signin", () => {
+		cy.visit("/");
 
-		cy.intercept('POST', '/api/signin').as('signin');
+		cy.intercept("POST", "/api/signin").as("signin");
 
-		cy.get('[data-cy-signin]').click();
-		cy.get('[data-cy-signin-username] input').type('alice');
+		cy.get("[data-cy-signin]").click();
+		cy.get("[data-cy-signin-username] input").type("alice");
 		// Enterキーでサインインできるかの確認も兼ねる
-		cy.get('[data-cy-signin-password] input').type('alice1234{enter}');
+		cy.get("[data-cy-signin-password] input").type("alice1234{enter}");
 
-		cy.wait('@signin');
-  });
+		cy.wait("@signin");
+	});
 
-	it('suspend', function() {
-		cy.request('POST', '/api/admin/suspend-user', {
+	it("suspend", function () {
+		cy.request("POST", "/api/admin/suspend-user", {
 			i: this.admin.token,
 			userId: this.alice.id,
 		});
 
-		cy.visit('/');
+		cy.visit("/");
 
-		cy.get('[data-cy-signin]').click();
-		cy.get('[data-cy-signin-username] input').type('alice');
-		cy.get('[data-cy-signin-password] input').type('alice1234{enter}');
+		cy.get("[data-cy-signin]").click();
+		cy.get("[data-cy-signin-username] input").type("alice");
+		cy.get("[data-cy-signin-password] input").type("alice1234{enter}");
 
 		// TODO: cypressにブラウザの言語指定できる機能が実装され次第英語のみテストするようにする
-		cy.contains(/アカウントが凍結されています|This account has been suspended due to/gi);
+		cy.contains(
+			/アカウントが凍結されています|This account has been suspended due to/gi,
+		);
 	});
 });
 
-describe('After user singed in', () => {
+describe("After user singed in", () => {
 	beforeEach(() => {
 		cy.resetState();
 
 		// インスタンス初期セットアップ
-		cy.registerUser('admin', 'pass', true);
+		cy.registerUser("admin", "pass", true);
 
 		// ユーザー作成
-		cy.registerUser('alice', 'alice1234');
+		cy.registerUser("alice", "alice1234");
 
-		cy.login('alice', 'alice1234');
+		cy.login("alice", "alice1234");
 	});
 
 	afterEach(() => {
@@ -131,17 +133,17 @@ describe('After user singed in', () => {
 		cy.wait(1000);
 	});
 
-  it('successfully loads', () => {
-		cy.get('[data-cy-open-post-form]').should('be.visible');
-  });
+	it("successfully loads", () => {
+		cy.get("[data-cy-open-post-form]").should("be.visible");
+	});
 
-	it('note', () => {
-		cy.get('[data-cy-open-post-form]').click();
-		cy.get('[data-cy-post-form-text]').type('Hello, Misskey!');
-		cy.get('[data-cy-open-post-form-submit]').click();
+	it("note", () => {
+		cy.get("[data-cy-open-post-form]").click();
+		cy.get("[data-cy-post-form-text]").type("Hello, Misskey!");
+		cy.get("[data-cy-open-post-form-submit]").click();
 
-		cy.contains('Hello, Misskey!');
-  });
+		cy.contains("Hello, Misskey!");
+	});
 });
 
 // TODO: 投稿フォームの公開範囲指定のテスト

cypress/e2e/widgets.cy.js

@@ -1,15 +1,14 @@
-describe('After user signed in', () => {
+describe("After user signed in", () => {
 	beforeEach(() => {
 		cy.resetState();
-		cy.viewport('macbook-16');
-
+		cy.viewport("macbook-16");
 		// インスタンス初期セットアップ
-		cy.registerUser('admin', 'pass', true);
+		cy.registerUser("admin", "pass", true);
 
 		// ユーザー作成
-		cy.registerUser('alice', 'alice1234');
+		cy.registerUser("alice", "alice1234");
 
-		cy.login('alice', 'alice1234');
+		cy.login("alice", "alice1234");
 	});
 
 	afterEach(() => {
@@ -18,48 +17,47 @@ describe('After user signed in', () => {
 		cy.wait(1000);
 	});
 
-  it('widget edit toggle is visible', () => {
-		cy.get('.mk-widget-edit').should('be.visible');
-  });
+	it("widget edit toggle is visible", () => {
+		cy.get(".mk-widget-edit").should("be.visible");
+	});
 
-	it('widget select should be visible in edit mode', () => {
-		cy.get('.mk-widget-edit').click();
-		cy.get('.mk-widget-select').should('be.visible');
-  });
+	it("widget select should be visible in edit mode", () => {
+		cy.get(".mk-widget-edit").click();
+		cy.get(".mk-widget-select").should("be.visible");
+	});
 
-	it('first widget should be removed', () => {
-		cy.get('.mk-widget-edit').click();
-		cy.get('.customize-container:first-child .remove._button').click();
-		cy.get('.customize-container').should('have.length', 2);
+	it("first widget should be removed", () => {
+		cy.get(".mk-widget-edit").click();
+		cy.get(".customize-container:first-child .remove._button").click();
+		cy.get(".customize-container").should("have.length", 2);
 	});
 
 	function buildWidgetTest(widgetName) {
 		it(`${widgetName} widget should get added`, () => {
-			cy.get('.mk-widget-edit').click();
-			cy.get('.mk-widget-select select').select(widgetName, { force: true });
-			cy.get('.bg._modalBg.transparent').click({ multiple: true, force: true });
-			cy.get('.mk-widget-add').click({ force: true });
-			cy.get(`.mkw-${widgetName}`).should('exist');
+			cy.get(".mk-widget-edit").click();
+			cy.get(".mk-widget-select select").select(widgetName, { force: true });
+			cy.get(".bg._modalBg.transparent").click({ multiple: true, force: true });
+			cy.get(".mk-widget-add").click({ force: true });
+			cy.get(`.mkw-${widgetName}`).should("exist");
 		});
 	}
 
-	buildWidgetTest('memo');
-	buildWidgetTest('notifications');
-	buildWidgetTest('timeline');
-	buildWidgetTest('calendar');
-	buildWidgetTest('rss');
-	buildWidgetTest('trends');
-	buildWidgetTest('clock');
-	buildWidgetTest('activity');
-	buildWidgetTest('photos');
-	buildWidgetTest('digitalClock');
-	buildWidgetTest('federation');
-	buildWidgetTest('postForm');
-	buildWidgetTest('slideshow');
-	buildWidgetTest('serverMetric');
-	buildWidgetTest('onlineUsers');
-	buildWidgetTest('jobQueue');
-	buildWidgetTest('button');
-	buildWidgetTest('aiscript');
-	buildWidgetTest('aichan');
+	buildWidgetTest("memo");
+	buildWidgetTest("notifications");
+	buildWidgetTest("timeline");
+	buildWidgetTest("calendar");
+	buildWidgetTest("rss");
+	buildWidgetTest("trends");
+	buildWidgetTest("clock");
+	buildWidgetTest("activity");
+	buildWidgetTest("photos");
+	buildWidgetTest("digitalClock");
+	buildWidgetTest("federation");
+	buildWidgetTest("postForm");
+	buildWidgetTest("slideshow");
+	buildWidgetTest("serverMetric");
+	buildWidgetTest("onlineUsers");
+	buildWidgetTest("jobQueue");
+	buildWidgetTest("button");
+	buildWidgetTest("aiscript");
 });

cypress/plugins/index.js

@@ -15,8 +15,7 @@
 /**
  * @type {Cypress.PluginConfig}
  */
-// eslint-disable-next-line no-unused-vars
 module.exports = (on, config) => {
-  // `on` is used to hook into various events Cypress emits
-  // `config` is the resolved Cypress config
-}
+	// `on` is used to hook into various events Cypress emits
+	// `config` is the resolved Cypress config
+};

cypress/support/commands.js

@@ -24,32 +24,34 @@
 // -- This will overwrite an existing command --
 // Cypress.Commands.overwrite('visit', (originalFn, url, options) => { ... })
 
-Cypress.Commands.add('resetState', () => {
-	cy.window(win => {
-		win.indexedDB.deleteDatabase('keyval-store');
+Cypress.Commands.add("resetState", () => {
+	cy.window((win) => {
+		win.indexedDB.deleteDatabase("keyval-store");
 	});
-	cy.request('POST', '/api/reset-db').as('reset');
-	cy.get('@reset').its('status').should('equal', 204);
+	cy.request("POST", "/api/reset-db").as("reset");
+	cy.get("@reset").its("status").should("equal", 204);
 	cy.reload(true);
 });
 
-Cypress.Commands.add('registerUser', (username, password, isAdmin = false) => {
-	const route = isAdmin ? '/api/admin/accounts/create' : '/api/signup';
+Cypress.Commands.add("registerUser", (username, password, isAdmin = false) => {
+	const route = isAdmin ? "/api/admin/accounts/create" : "/api/signup";
 
-	cy.request('POST', route, {
+	cy.request("POST", route, {
 		username: username,
 		password: password,
-	}).its('body').as(username);
+	})
+		.its("body")
+		.as(username);
 });
 
-Cypress.Commands.add('login', (username, password) => {
-	cy.visit('/');
+Cypress.Commands.add("login", (username, password) => {
+	cy.visit("/");
 
-	cy.intercept('POST', '/api/signin').as('signin');
+	cy.intercept("POST", "/api/signin").as("signin");
 
-	cy.get('[data-cy-signin]').click();
-	cy.get('[data-cy-signin-username] input').type(username);
-	cy.get('[data-cy-signin-password] input').type(`${password}{enter}`);
+	cy.get("[data-cy-signin]").click();
+	cy.get("[data-cy-signin-username] input").type(username);
+	cy.get("[data-cy-signin-password] input").type(`${password}{enter}`);
 
-	cy.wait('@signin').as('signedIn');
+	cy.wait("@signin").as("signedIn");
 });

cypress/support/e2e.js

@@ -14,19 +14,21 @@
 // ***********************************************************
 
 // Import commands.js using ES2015 syntax:
-import './commands'
+import "./commands";
 
 // Alternatively you can use CommonJS syntax:
 // require('./commands')
 
-Cypress.on('uncaught:exception', (err, runnable) => {
-	if ([
-		// Chrome
-		'ResizeObserver loop limit exceeded',
+Cypress.on("uncaught:exception", (err, runnable) => {
+	if (
+		[
+			// Chrome
+			"ResizeObserver loop limit exceeded",
 
-		// Firefox
-		'ResizeObserver loop completed with undelivered notifications',
-	].some(msg => err.message.includes(msg))) {
+			// Firefox
+			"ResizeObserver loop completed with undelivered notifications",
+		].some((msg) => err.message.includes(msg))
+	) {
 		return false;
 	}
 });

dev/docker-compose.yml.example

@@ -0,0 +1,57 @@
+version: "3"
+
+services:
+  web:
+    image: registry.joinfirefish.org/firefish/firefish
+    build: ..
+    container_name: firefish_web
+    restart: always
+    depends_on:
+      - db
+      - redis
+#      - es
+    ports:
+      - "3000:3000"
+    networks:
+      - network
+#      - web
+    volumes:
+      - ../files:/firefish/files
+      - ../.config:/firefish/.config:ro
+
+  redis:
+    restart: always
+    container_name: firefish_redis
+    image: docker.io/redis:7.0-alpine
+    networks:
+      - network
+    volumes:
+      - ../redis:/data
+
+  db:
+    restart: always
+    image: docker.io/postgres:12.2-alpine
+    container_name: firefish_db
+    networks:
+      - network
+    env_file:
+      - ../.config/docker.env
+    volumes:
+      - ../db:/var/lib/postgresql/data
+
+#  es:
+#    restart: always
+#    image: docker.elastic.co/elasticsearch/elasticsearch-oss:6.4.2
+#    environment:
+#      - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
+#      - "TAKE_FILE_OWNERSHIP=111"
+#    networks:
+#      - network
+#    volumes:
+#      - ./elasticsearch:/usr/share/elasticsearch/data
+
+networks:
+  network:
+#  web:
+#    external:
+#      name: web

docker-compose.yml

@@ -2,51 +2,75 @@ version: "3"
 
 services:
   web:
-    build: .
-    restart: always
-    links:
+    image: registry.joinfirefish.org/firefish/firefish
+    container_name: firefish_web
+    restart: unless-stopped
+    depends_on:
       - db
       - redis
-#      - es
+### Uncomment one of the following to use a search engine
+#     - meilisearch
+#     - sonic
     ports:
       - "3000:3000"
     networks:
-      - internal_network
-      - external_network
+      - calcnet
+#     - web
+    environment:
+      NODE_ENV: production
     volumes:
-      - ./files:/misskey/files
-      - ./.config:/misskey/.config:ro
+      - ./files:/firefish/files
+      - ./.config:/firefish/.config:ro
 
   redis:
-    restart: always
-    image: redis:4.0-alpine
+    restart: unless-stopped
+    image: docker.io/redis:7.0-alpine
+    container_name: firefish_redis
     networks:
-      - internal_network
+      - calcnet
     volumes:
       - ./redis:/data
 
   db:
-    restart: always
-    image: postgres:12.2-alpine
+    restart: unless-stopped
+    image: docker.io/postgres:12.2-alpine
+    container_name: firefish_db
     networks:
-      - internal_network
+      - calcnet
     env_file:
       - .config/docker.env
     volumes:
       - ./db:/var/lib/postgresql/data
 
-#  es:
-#    restart: always
-#    image: docker.elastic.co/elasticsearch/elasticsearch-oss:6.4.2
+### Only one of the below should be used.
+### Meilisearch is better overall, but resource-intensive. Sonic is a very light full text search engine.
+
+#  meilisearch:
+#    container_name: meilisearch
+#    image: getmeili/meilisearch:v1.1.1
 #    environment:
-#      - "ES_JAVA_OPTS=-Xms512m -Xmx512m"
-#      - "TAKE_FILE_OWNERSHIP=111"
+#      - MEILI_ENV=${MEILI_ENV:-development}
+#    ports:
+#      - "7700:7700"
 #    networks:
-#      - internal_network
+#      - calcnet
 #    volumes:
-#      - ./elasticsearch:/usr/share/elasticsearch/data
+#      - ./meili_data:/meili_data
+#    restart: unless-stopped
+
+#  sonic:
+#    restart: unless-stopped
+#    image: docker.io/valeriansaliou/sonic:v1.4.0
+#    logging:
+#     driver: none
+#    networks:
+#      - calcnet
+#    volumes:
+#      - ./sonic:/var/lib/sonic/store
+#      - ./sonic/config.cfg:/etc/sonic.cfg
 
 networks:
-  internal_network:
-    internal: true
-  external_network:
+  calcnet:
+  #  web:
+  #    external:
+  #      name: web

docs/DONATORS.md

@@ -1,25 +0,0 @@
-DONATORS
-========
-The list of people who have sent donation for Misskey.
-
-(In random order, honorific titles are omitted.)
-
-* らふぁ
-* 俺様
-* なぎうり
-* スルメ https://surume.tk/
-* 藍
-* 音船 https://otofune.me/
-* aqz https://misskey.xyz/aqz
-* kotodu "虚無創作中"
-* Maya Minatsuki
-* Knzk https://knzk.me/@Knzk
-* ねじりわさび https://knzk.me/@y
-* NCLS https://knzk.me/@imncls]
-* こじま @skoji@sandbox.skoji.jp
-
-:heart: Thanks for donating, guys!
-
----
-
-If your name is missing, please contact us!

docs/api-change.md

@@ -0,0 +1,13 @@
+# Changes to the Firefish API
+
+Breaking changes are indicated by the :warning: icon.
+
+## v1.0.5 (unreleased)
+
+### dev17
+
+- Added `lang` parameter to `notes/create` and `notes/edit`.
+
+### dev11
+
+- :warning: `notes/translate` now requires credentials.

docs/api-doc.md

@@ -0,0 +1,5 @@
+# API Documentation
+
+You can find interactive API documentation at any Firefish instance. https://firefish.social/api-doc
+
+You can also find auto-generated documentation for firefish-js [here](../packages/firefish-js/markdown/firefish-js.md).